| Internet Engineering Task Force (IETF) | M. Bishop |
| Request for Comments: 9412 | Akamai |
| Category: Standards Track | June 2023 |
| ISSN: 2070-1721 |
The ORIGIN frame for HTTP/2 is equally applicable to HTTP/3, but it needs to be separately registered. This document describes the ORIGIN frame for HTTP/3.¶
This is an Internet Standards Track document.¶
This document is a product of the Internet Engineering Task Force (IETF). It represents the consensus of the IETF community. It has received public review and has been approved for publication by the Internet Engineering Steering Group (IESG). Further information on Internet Standards is available in Section 2 of RFC 7841.¶
Information about the current status of this document, any errata, and how to provide feedback on it may be obtained at https://www.rfc-editor.org/info/rfc9412.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Existing RFCs define extensions to HTTP/2 [HTTP/2] that remain useful in HTTP/3. Appendix A.2 of [HTTP/3] describes the required updates for HTTP/2 frames to be used with HTTP/3.¶
[ORIGIN] defines the HTTP/2 ORIGIN frame, which indicates what origins are available on a given connection. It defines a single HTTP/2 frame type.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The frame diagram in this document uses the format defined in Section 1.3 of [QUIC-TRANSPORT] to illustrate the order and size of fields.¶
The ORIGIN HTTP/3 frame allows a server to indicate what origin or origins [RFC6454] the server would like the client to consider as one or more members of the Origin Set (Section 2.3 of [ORIGIN]) for the connection within which it occurs.¶
The semantics of the frame payload are identical to those of the HTTP/2 frame defined in [ORIGIN]. Where HTTP/2 reserves stream 0 for frames related to the state of the connection, HTTP/3 defines a pair of unidirectional streams called "control streams" for this purpose.¶
Where [ORIGIN] indicates that the ORIGIN frame is sent on stream 0, this should be interpreted to mean the HTTP/3 control stream: that is, the ORIGIN frame is sent from servers to clients on the server's control stream.¶
HTTP/3 does not define a Flags field in the generic frame layout. As no flags have been defined for the ORIGIN frame, this specification does not define a mechanism for communicating such flags in HTTP/3.¶
The ORIGIN frame has a layout that is nearly identical to the layout used in HTTP/2; the information is restated here for clarity. The ORIGIN frame type is 0x0c (decimal 12), as in HTTP/2. The payload contains zero or more instances of the Origin-Entry field.¶
HTTP/3 Origin-Entry {
Origin-Len (16),
ASCII-Origin (..),
}
HTTP/3 ORIGIN Frame {
Type (i) = 0x0c,
Length (i),
Origin-Entry (..) ...,
}
Figure 1: ORIGIN Frame Layout
An Origin-Entry is a length-delimited string. Specifically, it contains two fields:¶
This document registers a frame type in the "HTTP/3 Frame Types" registry defined by [HTTP/3], located at <https://www.iana.org/assignments/http3-parameters/>.¶