RFC 7616 - HTTP Digest Access Authentication

The Hypertext Transfer Protocol (HTTP) provides a simple challenge-response authentication mechanism that may be used by a server to challenge a client request and by a client to provide authentication information. This document defines the HTTP Digest Authentication scheme that can be used with the HTTP authentication mechanism.¶

3. Digest Access Authentication Scheme

3.1. Overall Operation

The Digest scheme is based on a simple challenge-response paradigm. The Digest scheme challenges using a nonce value and might indicate that username hashing is supported. A valid response contains an unkeyed digest of the username, the password, the given nonce value, the HTTP method, and the requested URI. In this way, the password is never sent in the clear, and the username can be hashed, depending on the indication received from the server. The username and password must be prearranged in some fashion not addressed by this document.¶

3.2. Representation of Digest Values

An optional header field allows the server to specify the algorithm used to create the unkeyed digest or digest. This document adds SHA-256 and SHA-512/256 algorithms. To maintain backwards compatibility with [RFC2617], the MD5 algorithm is still supported but NOT RECOMMENDED.¶

The size of the digest depends on the algorithm used. The bits in the digest are converted from the most significant to the least significant bit, four bits at a time, to the ASCII representation as follows. Each sequence of four bits is represented by its familiar hexadecimal notation from the characters 0123456789abcdef; that is, binary 0000 is represented by the character '0', 0001 by '1' and so on up to the representation of 1111 as 'f'. If the MD5 algorithm is used to calculate the digest, then the MD5 digest will be represented as 32 hexadecimal characters, while SHA-256 and SHA-512/256 are represented as 64 hexadecimal characters.¶

3.3. The WWW-Authenticate Response Header Field

If a server receives a request for an access-protected object, and an acceptable Authorization header field is not sent, the server responds with a "401 Unauthorized" status code and a WWW-Authenticate header field with Digest scheme as per the framework defined above. The value of the header field can include parameters from the following list:¶

realm ¶

A string to be displayed to users so they know which username and password to use. This string should contain at least the name of the host performing the authentication and might additionally indicate the collection of users who might have access. An example is "registered_users@example.com". (See Section 2.2 of [RFC7235] for more details.)

domain ¶

A quoted, space-separated list of URIs, as specified in [RFC3986], that define the protection space. If a URI is a path-absolute, it is relative to the canonical root URL. (See Section 2.2 of [RFC7235].) An absolute-URI in this list may refer to a different server than the web-origin [RFC6454]. The client can use this list to determine the set of URIs for which the same authentication information may be sent: any URI that has a URI in this list as a prefix (after both have been made absolute) MAY be assumed to be in the same protection space. If this parameter is omitted or its value is empty, the client SHOULD assume that the protection space consists of all URIs on the web-origin.
This parameter is not meaningful in Proxy-Authenticate header fields, for which the protection space is always the entire proxy; if present, it MUST be ignored.

nonce ¶

A server-specified string which should be uniquely generated each time a 401 response is made. It is advised that this string be Base64 or hexadecimal data. Specifically, since the string is passed in the header field lines as a quoted string, the double-quote character is not allowed, unless suitably escaped.
The contents of the nonce are implementation dependent. The quality of the implementation depends on a good choice. A nonce might, for example, be constructed as the Base64 encoding of
```
         timestamp H(timestamp ":" ETag ":" secret-data)
```
where timestamp is a server-generated time, which preferably includes micro- or nanoseconds, or other non-repeating values; ETag is the value of the HTTP ETag header field associated with the requested entity; and secret-data is data known only to the server. With a nonce of this form, a server would recalculate the hash portion after receiving the client authentication header field and reject the request if it did not match the nonce from that header field or if the timestamp value is not recent enough. In this way, the server can limit the time of the nonce's validity. The inclusion of the ETag prevents a replay request for an updated version of the resource. Including the IP address of the client in the nonce would appear to offer the server the ability to limit the reuse of the nonce to the same client that originally got it. However, that would break because requests from a single user often go through different proxies. Also, IP address spoofing is not that hard.
An implementation might choose not to accept a previously used nonce or a previously used digest, in order to protect against a replay attack. Or, an implementation might choose to use one-time nonces or digests for POST or PUT requests and a timestamp for GET requests. For more details on the issues involved, see Section 5 of this document.
The nonce is opaque to the client.

opaque ¶

A string of data, specified by the server, that SHOULD be returned by the client unchanged in the Authorization header field of subsequent requests with URIs in the same protection space. It is RECOMMENDED that this string be Base64 or hexadecimal data.

stale ¶

A case-insensitive flag indicating that the previous request from the client was rejected because the nonce value was stale. If stale is true, the client may wish to simply retry the request with a new encrypted response, without re-prompting the user for a new username and password. The server SHOULD only set stale to true if it receives a request for which the nonce is invalid. If stale is false, or anything other than true, or the stale parameter is not present, the username and/or password are invalid, and new values MUST be obtained.

algorithm ¶

A string indicating an algorithm used to produce the digest and an unkeyed digest. If this is not present, it is assumed to be "MD5". If the algorithm is not understood, the challenge SHOULD be ignored (and a different one used, if there is more than one).
When used with the Digest mechanism, each one of the algorithms has two variants: Session variant and non-Session variant. The non-Session variant is denoted by "<algorithm>", e.g., "SHA-256", and the Session variant is denoted by "<algorithm>-sess", e.g., "SHA-256-sess".
In this document, the string obtained by applying the digest algorithm to the data "data" with secret "secret" will be denoted by KD(secret, data), and the string obtained by applying the unkeyed digest algorithm to the data "data" will be denoted H(data). KD stands for Keyed Digest, and the notation unq(X) means the value of the quoted-string X without the surrounding quotes and with quoting slashes removed.
```
     For "<algorithm>" and "<algorithm>-sess"

         H(data) = <algorithm>(data)

     and

         KD(secret, data) = H(concat(secret, ":", data))
```

For example:

     For the "SHA-256" and "SHA-256-sess" algorithms

         H(data) = SHA-256(data)

i.e., the digest is the "<algorithm>" of the secret concatenated with a colon concatenated with the data. The "<algorithm>-sess" is intended to allow efficient third-party authentication servers; for the difference in usage, see the description in Section 3.4.2.

qop ¶

This parameter MUST be used by all implementations. It is a quoted string of one or more tokens indicating the "quality of protection" values supported by the server. The value "auth" indicates authentication; the value "auth-int" indicates authentication with integrity protection. See the descriptions below for calculating the response parameter value for the application of this choice. Unrecognized options MUST be ignored.

charset ¶

This is an OPTIONAL parameter that is used by the server to indicate the encoding scheme it supports. The only allowed value is "UTF-8".

userhash ¶

This is an OPTIONAL parameter that is used by the server to indicate that it supports username hashing. Valid values are: "true" or "false". Default value is "false".

For historical reasons, a sender MUST only generate the quoted string syntax values for the following parameters: realm, domain, nonce, opaque, and qop.¶

For historical reasons, a sender MUST NOT generate the quoted string syntax values for the following parameters: stale and algorithm.¶

3.4. The Authorization Header Field

The client is expected to retry the request, passing an Authorization header field line with Digest scheme, which is defined according to the framework above. The values of the opaque and algorithm fields must be those supplied in the WWW-Authenticate response header field for the entity being requested.¶

The request can include parameters from the following list:¶

response ¶

A string of the hex digits computed as defined below; it proves that the user knows a password.

username ¶

The user's name in the specified realm. The quoted string contains the name in plaintext or the hash code in hexadecimal notation. If the username contains characters not allowed inside the ABNF quoted-string production, the username* parameter can be used. Sending both username and username* in the same header option MUST be treated as an error.

username* ¶

If the userhash parameter value is set "false" and the username contains characters not allowed inside the ABNF quoted-string production, the user's name can be sent with this parameter, using the extended notation defined in [RFC5987].

realm ¶

See "realm" definition in Section 3.3.

uri ¶

The Effective Request URI (Section 5.5 of [RFC7230]) of the HTTP request; duplicated here because proxies are allowed to change the request target ("request-target", Section 3.1.1 of [RFC7230]) in transit.

qop ¶

Indicates what "quality of protection" the client has applied to the message. Its value MUST be one of the alternatives the server indicated it supports in the WWW-Authenticate header field. These values affect the computation of the response. Note that this is a single token, not a quoted list of alternatives as in WWW-Authenticate.

cnonce ¶

This parameter MUST be used by all implementations. The cnonce value is an opaque quoted ASCII-only string value provided by the client and used by both client and server to avoid chosen plaintext attacks, to provide mutual authentication, and to provide some message integrity protection. See the descriptions below of the calculation of the rspauth and response values.

nc ¶

This parameter MUST be used by all implementations. The nc parameter stands for "nonce count". The nc value is the hexadecimal count of the number of requests (including the current request) that the client has sent with the nonce value in this request. For example, in the first request sent in response to a given nonce value, the client sends "nc=00000001". The purpose of this parameter is to allow the server to detect request replays by maintaining its own copy of this count -- if the same nc value is seen twice, then the request is a replay. See the description below of the construction of the response value.

userhash ¶

This OPTIONAL parameter is used by the client to indicate that the username has been hashed. Valid values are: "true" or "false". Default value is "false".

For historical reasons, a sender MUST only generate the quoted string syntax for the following parameters: username, realm, nonce, uri, response, cnonce, and opaque.¶

For historical reasons, a sender MUST NOT generate the quoted string syntax for the following parameters: algorithm, qop, and nc.¶

If a parameter or its value is improper, or required parameters are missing, the proper response is a 4xx error code. If the response is invalid, then a login failure SHOULD be logged, since repeated login failures from a single client may indicate an attacker attempting to guess passwords. The server implementation SHOULD be careful with the information being logged so that it won't put a cleartext password (e.g., entered into the username field) into the log.¶

The definition of the response above indicates the encoding for its value. The following definitions show how the value is computed.¶

3.4.1. Response

If the qop value is "auth" or "auth-int":¶

      response = <"> < KD ( H(A1), unq(nonce)
                                   ":" nc
                                   ":" unq(cnonce)
                                   ":" unq(qop)
                                   ":" H(A2)
                          ) <">

See below for the definitions for A1 and A2.¶

3.4.2. A1

If the algorithm parameter's value is "<algorithm>", e.g., "SHA-256", then A1 is:¶

      A1       = unq(username) ":" unq(realm) ":" passwd

where¶

      passwd   = < user's password >

If the algorithm parameter's value is "<algorithm>-sess", e.g., "SHA-256-sess", then A1 is calculated using the nonce value provided in the challenge from the server, and cnonce value from the request by the client following receipt of a WWW-Authenticate challenge from the server. It uses the server nonce from that challenge, herein called nonce-prime, and the client nonce value from the response, herein called cnonce-prime, to construct A1 as follows:¶

      A1       = H( unq(username) ":" unq(realm) ":" passwd )
                     ":" unq(nonce-prime) ":" unq(cnonce-prime)

This creates a "session key" for the authentication of subsequent requests and responses that is different for each "authentication session", thus limiting the amount of material hashed with any one key. (Note: see further discussion of the authentication session in Section 3.6.) Because the server needs only use the hash of the user credentials in order to create the A1 value, this construction could be used in conjunction with a third-party authentication service so that the web server would not need the actual password value. The specification of such a protocol is beyond the scope of this specification.¶

3.4.3. A2

If the qop parameter's value is "auth" or is unspecified, then A2 is:¶

      A2       = Method ":" request-uri

If the qop value is "auth-int", then A2 is:¶

      A2       = Method ":" request-uri ":" H(entity-body)

3.4.4. Username Hashing

To protect the transport of the username from the client to the server, the server SHOULD set the userhash parameter with the value of "true" in the WWW-Authentication header field.¶

If the client supports the userhash parameter, and the userhash parameter value in the WWW-Authentication header field is set to "true", then the client MUST calculate a hash of the username after any other hash calculation and include the userhash parameter with the value of "true" in the Authorization header field. If the client does not provide the username as a hash value or the userhash parameter with the value of "true", the server MAY reject the request.¶

The following is the operation that the client will perform to hash the username, using the same algorithm used to hash the credentials:¶

   username = H( unq(username) ":" unq(realm) )

3.4.5. Parameter Values and Quoted-String

Note that the value of many of the parameters, such as username value, are defined as a "quoted-string". However, the "unq" notation indicates that surrounding quotation marks are removed in forming the string A1. Thus, if the Authorization header field includes the fields¶

   username="Mufasa", realm="myhost@example.com"

and the user Mufasa has password "Circle Of Life", then H(A1) would be H(Mufasa:myhost@example.com:Circle Of Life) with no quotation marks in the digested string.¶

No white space is allowed in any of the strings to which the digest function H() is applied, unless that white space exists in the quoted strings or entity body whose contents make up the string to be digested. For example, the string A1 illustrated above must be¶

   Mufasa:myhost@example.com:Circle Of Life

with no white space on either side of the colons, but with the white space between the words used in the password value. Likewise, the other strings digested by H() must not have white space on either side of the colons that delimit their fields, unless that white space was in the quoted strings or entity body being digested.¶

Also, note that if integrity protection is applied (qop=auth-int), the H(entity-body) is the hash of the entity body, not the message body -- it is computed before any transfer encoding is applied by the sender and after it has been removed by the recipient. Note that this includes multipart boundaries and embedded header fields in each part of any multipart content-type.¶

3.4.6. Various Considerations

The "Method" value is the HTTP request method, in US-ASCII letters, as specified in Section 3.1.1 of [RFC7230]. The "request-target" value is the request-target from the request line as specified in Section 3.1.1 of [RFC7230]. This MAY be "*", an "absolute-URI", or an "absolute-path" as specified in Section 2.7 of [RFC7230], but it MUST agree with the request-target. In particular, it MUST be an "absolute-URI" if the request-target is an "absolute-URI". The cnonce value is a client-chosen value whose purpose is to foil chosen plaintext attacks.¶

The authenticating server MUST assure that the resource designated by the "uri" parameter is the same as the resource specified in the Request-Line; if they are not, the server SHOULD return a 400 Bad Request error. (Since this may be a symptom of an attack, server implementers may want to consider logging such errors.) The purpose of duplicating information from the request URL in this field is to deal with the possibility that an intermediate proxy may alter the client's Request-Line. This altered (but presumably semantically equivalent) request would not result in the same digest as that calculated by the client.¶

Implementers should be aware of how authenticated transactions need to interact with shared caches (see [RFC7234]).¶

3.5. The Authentication-Info and Proxy-Authentication-Info Header Fields

The Authentication-Info header field and the Proxy-Authentication-Info header field [RFC7615] are generic fields that MAY be used by a server to communicate some information regarding the successful authentication of a client response.¶

The Digest Authentication scheme MAY add the Authentication-Info header field in the confirmation request and include parameters from the following list:¶

nextnonce ¶

The value of the nextnonce parameter is the nonce the server wishes the client to use for a future authentication response. The server MAY send the Authentication-Info header field with a nextnonce field as a means of implementing one-time nonces or otherwise changing nonces. If the nextnonce field is present, the client SHOULD use it when constructing the Authorization header field for its next request. Failure of the client to do so MAY result in a request to re-authenticate from the server with the "stale=true".
- Server implementations SHOULD carefully consider the performance implications of the use of this mechanism; pipelined requests will not be possible if every response includes a nextnonce parameter that MUST be used on the next request received by the server. Consideration SHOULD be given to the performance vs. security tradeoffs of allowing an old nonce value to be used for a limited time to permit request pipelining. Use of the nc parameter can retain most of the security advantages of a new server nonce without the deleterious effects on pipelining.

qop ¶

Indicates the "quality of protection" options applied to the response by the server. The value "auth" indicates authentication; the value "auth-int" indicates authentication with integrity protection. The server SHOULD use the same value for the qop parameter in the response as was sent by the client in the corresponding request.

rspauth ¶

The optional response digest in the rspauth parameter supports mutual authentication -- the server proves that it knows the user's secret, and with qop=auth-int also provides limited integrity protection of the response. The rspauth value is calculated as for the response in the Authorization header field, except that if qop is set to "auth" or is not specified in the Authorization header field for the request, A2 is

      A2       = ":" request-uri

and if "qop=auth-int", then A2 is

      A2       = ":" request-uri ":" H(entity-body)

cnonce and nc ¶

The cnonce value and nc value MUST be the ones for the client request to which this message is the response. The rspauth, cnonce, and nc parameters MUST be present if "qop=auth" or "qop=auth-int" is specified.

The Authentication-Info header field is allowed in the trailer of an HTTP message transferred via chunked transfer coding.¶

For historical reasons, a sender MUST only generate the quoted string syntax for the following parameters: nextnonce, rspauth, and cnonce.¶

For historical reasons, a sender MUST NOT generate the quoted string syntax for the following parameters: qop and nc.¶

For historical reasons, the nc value MUST be exactly 8 hexadecimal digits.¶

3.6. Digest Operation

Upon receiving the Authorization header field, the server MAY check its validity by looking up the password that corresponds to the submitted username. Then, the server MUST perform the same digest operation (e.g., MD5, SHA-256) performed by the client and compare the result to the given response value.¶

Note that the HTTP server does not actually need to know the user's cleartext password. As long as H(A1) is available to the server, the validity of an Authorization header field can be verified.¶

The client response to a WWW-Authenticate challenge for a protection space starts an authentication session with that protection space. The authentication session lasts until the client receives another WWW-Authenticate challenge from any server in the protection space. A client SHOULD remember the username, password, nonce, nonce count, and opaque values associated with an authentication session to use to construct the Authorization header field in future requests within that protection space. The Authorization header field MAY be included preemptively; doing so improves server efficiency and avoids extra round trips for authentication challenges. The server MAY choose to accept the old Authorization header field information, even though the nonce value included might not be fresh. Alternatively, the server MAY return a 401 response with a new nonce value in the WWW-Authenticate header field, causing the client to retry the request; by specifying "stale=true" with this response, the server tells the client to retry with the new nonce, but without prompting for a new username and password.¶

Because the client is required to return the value of the opaque parameter given to it by the server for the duration of a session, the opaque data can be used to transport authentication session state information. (Note that any such use can also be accomplished more easily and safely by including the state in the nonce.) For example, a server could be responsible for authenticating content that actually sits on another server. It would achieve this by having the first 401 response include a domain parameter whose value includes a URI on the second server, and an opaque parameter whose value contains the state information. The client will retry the request, at which time the server might respond with "HTTP Redirection" (Section 6.4 of [RFC7231]), pointing to the URI on the second server. The client will follow the redirection and pass an Authorization header field, including the <opaque> data.¶

Proxies MUST be completely transparent in the Digest access authentication scheme. That is, they MUST forward the WWW-Authenticate, Authentication-Info, and Authorization header fields untouched. If a proxy wants to authenticate a client before a request is forwarded to the server, it can be done using the Proxy-Authenticate and Proxy-Authorization header fields described in Section 3.8 below.¶

3.7. Security Protocol Negotiation

It is useful for a server to be able to know which security schemes a client is capable of handling.¶

It is possible that a server wants to require Digest as its authentication method, even if the server does not know that the client supports it. A client is encouraged to fail gracefully if the server specifies only authentication schemes it cannot handle.¶

When a server receives a request to access a resource, the server might challenge the client by responding with "401 Unauthorized" response and include one or more WWW-Authenticate header fields. If the server responds with multiple challenges, then each one of these challenges MUST use a different digest algorithm. The server MUST add these challenges to the response in order of preference, starting with the most preferred algorithm, followed by the less preferred algorithm.¶

This specification defines the following algorithms: ¶

SHA2-256 (mandatory to implement)
SHA2-512/256 (as a backup algorithm)
MD5 (for backward compatibility).

When the client receives the first challenge, it SHOULD use the first challenge it supports, unless a local policy dictates otherwise.¶

3.8. Proxy-Authenticate and Proxy-Authorization

The Digest Authentication scheme can also be used for authenticating users to proxies, proxies to proxies, or proxies to origin servers by use of the Proxy-Authenticate and Proxy-Authorization header fields. These header fields are instances of the Proxy-Authenticate and Proxy-Authorization header fields specified in Sections 4.3 and 4.4 of the HTTP/1.1 specification [RFC7235], and their behavior is subject to restrictions described there. The transactions for proxy authentication are very similar to those already described. Upon receiving a request that requires authentication, the proxy/server MUST issue the "407 Proxy Authentication Required" response with a "Proxy-Authenticate" header field. The digest-challenge used in the Proxy-Authenticate header field is the same as that for the WWW-Authenticate header field as defined above in Section 3.3.¶

The client/proxy MUST then reissue the request with a Proxy-Authorization header field, with parameters as specified for the Authorization header field in Section 3.4 above.¶

On subsequent responses, the server sends Proxy-Authentication-Info with parameters the same as those for the Authentication-Info header field.¶

Note that, in principle, a client could be asked to authenticate itself to both a proxy and an end-server, but never in the same response.¶

3.9. Examples

3.9.1. Example with SHA-256 and MD5

The following example assumes that an access-protected document is being requested from the server via a GET request. The URI of the document is "http://www.example.org/dir/index.html". Both client and server know that the username for this document is "Mufasa" and the password is "Circle of Life" (with one space between each of the three words).¶

The first time the client requests the document, no Authorization header field is sent, so the server responds with:¶

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Digest
    realm="http-auth@example.org",
    qop="auth, auth-int",
    algorithm=SHA-256,
    nonce="7ypf/xlj9XXwfDPEoM4URrv/xwf94BcCAzFZH4GiTo0v",
    opaque="FQhe/qaU925kfnzjCev0ciny7QMkPqMAFRtzCUYo5tdS"
WWW-Authenticate: Digest
    realm="http-auth@example.org",
    qop="auth, auth-int",
    algorithm=MD5,
    nonce="7ypf/xlj9XXwfDPEoM4URrv/xwf94BcCAzFZH4GiTo0v",
    opaque="FQhe/qaU925kfnzjCev0ciny7QMkPqMAFRtzCUYo5tdS"

The client can prompt the user for their username and password, after which it will respond with a new request, including the following Authorization header field if the client chooses MD5 digest:¶

Authorization: Digest username="Mufasa",
    realm="http-auth@example.org",
    uri="/dir/index.html",
    algorithm=MD5,
    nonce="7ypf/xlj9XXwfDPEoM4URrv/xwf94BcCAzFZH4GiTo0v",
    nc=00000001,
    cnonce="f2/wE4q74E6zIJEtWaHKaf5wv/H5QzzpXusqGemxURZJ",
    qop=auth,
    response="8ca523f5e9506fed4657c9700eebdbec",
    opaque="FQhe/qaU925kfnzjCev0ciny7QMkPqMAFRtzCUYo5tdS"

If the client chooses to use the SHA-256 algorithm for calculating the response, the client responds with a new request including the following Authorization header field:¶

Authorization: Digest username="Mufasa",
    realm="http-auth@example.org",
    uri="/dir/index.html",
    algorithm=SHA-256,
    nonce="7ypf/xlj9XXwfDPEoM4URrv/xwf94BcCAzFZH4GiTo0v",
    nc=00000001,
    cnonce="f2/wE4q74E6zIJEtWaHKaf5wv/H5QzzpXusqGemxURZJ",
    qop=auth,
    response="753927fa0e85d155564e2e272a28d1802ca10daf449
       6794697cf8db5856cb6c1",
    opaque="FQhe/qaU925kfnzjCev0ciny7QMkPqMAFRtzCUYo5tdS"

3.9.2. Example with SHA-512-256, Charset, and Userhash

The following example assumes that an access-protected document is being requested from the server via a GET request. The URI for the request is "http://api.example.org/doe.json". Both client and server know the userhash of the username, support the UTF-8 character encoding scheme, and use the SHA-512-256 algorithm. The username for the request is a variation of "Jason Doe", where the 'a' actually is Unicode code point U+00E4 ("LATIN SMALL LETTER A WITH DIAERESIS"), and the first 'o' is Unicode code point U+00F8 ("LATIN SMALL LETTER O WITH STROKE"), leading to the octet sequence using the UTF-8 encoding scheme:¶

   J  U+00E4 s  U+00F8 n      D  o  e
   4A C3A4   73 C3B8   6E 20 44  6F 65

The password is "Secret, or not?".¶

The first time the client requests the document, no Authorization header field is sent, so the server responds with:¶

HTTP/1.1 401 Unauthorized
WWW-Authenticate: Digest
    realm="api@example.org",
    qop="auth",
    algorithm=SHA-512-256,
    nonce="5TsQWLVdgBdmrQ0XsxbDODV+57QdFR34I9HAbC/RVvkK",
    opaque="HRPCssKJSGjCrkzDg8OhwpzCiGPChXYjwrI2QmXDnsOS",
    charset=UTF-8,
    userhash=true

The client can prompt the user for the required credentials and send a new request with following Authorization header field:¶

Authorization: Digest
    username="488869477bf257147b804c45308cd62ac4e25eb717
       b12b298c79e62dcea254ec",
    realm="api@example.org",
    uri="/doe.json",
    algorithm=SHA-512-256,
    nonce="5TsQWLVdgBdmrQ0XsxbDODV+57QdFR34I9HAbC/RVvkK",
    nc=00000001,
    cnonce="NTg6RKcb9boFIAS3KrFK9BGeh+iDa/sm6jUMp2wds69v",
    qop=auth,
    response="ae66e67d6b427bd3f120414a82e4acff38e8ecd9101d
       6c861229025f607a79dd",
    opaque="HRPCssKJSGjCrkzDg8OhwpzCiGPChXYjwrI2QmXDnsOS",
    userhash=true

If the client cannot provide a hashed username for any reason, the client can try a request with this Authorization header field:¶

Authorization: Digest
    username*=UTF-8''J%C3%A4s%C3%B8n%20Doe,
    realm="api@example.org",
    uri="/doe.json",
    algorithm=SHA-512-256,
    nonce="5TsQWLVdgBdmrQ0XsxbDODV+57QdFR34I9HAbC/RVvkK",
    nc=00000001,
    cnonce="NTg6RKcb9boFIAS3KrFK9BGeh+iDa/sm6jUMp2wds69v",
    qop=auth,
    response="ae66e67d6b427bd3f120414a82e4acff38e8ecd9101d
       6c861229025f607a79dd",
    opaque="HRPCssKJSGjCrkzDg8OhwpzCiGPChXYjwrI2QmXDnsOS",
    userhash=false

Hash Algorithm	Digest Size	Reference
"MD5"	128	RFC 7616
"SHA-512-256"	256	RFC 7616
"SHA-256"	256	RFC 7616