Network Working GroupJ. Reschke
Internet-Draftgreenbytes
Intended status: Standards TrackAugust 2010
Expires: February 2011

Character Set and Language Encoding for Hypertext Transfer Protocol (HTTP) Header Field Parameters

Note: a later version of this document has been published as RFC 5987.

Abstract

By default, message header field parameters in Hypertext Transfer Protocol (HTTP) messages can I not carry characters outside the ISO-8859-1 character set. RFC 2231 defines an encoding mechanism for use in Multipurpose Internet Mail Extensions (MIME) headers. This document specifies an encoding suitable for use in HTTP header fields  I whichthat is compatible  I towith a profile of the encoding defined in RFC 2231.

Status of This Memo

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.

This Internet-Draft will expire in February 2011.

Copyright Notice

Copyright (c) 2010 IETF Trust and the persons identified as the document authors. All rights reserved.

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.

 I  

Editorial Note (To be removed by RFC Editor before publication)

There are multiple HTTP header fields that already use RFC 2231 encoding in practice (Content-Disposition) or might use it in the future (Link). The purpose of this document is to provide a single place where the generic aspects of RFC 2231 encoding in HTTP header fields are defined.

Distribution of this document is unlimited. Although this is not a work item of the HTTPbis Working Group, comments should be sent to the Hypertext Transfer Protocol (HTTP) mailing list at ietf-http-wg@w3.org, which may be joined by sending a message with subject "subscribe" to ietf-http-wg-request@w3.org.

Discussions of the HTTPbis Working Group are archived at <http://lists.w3.org/Archives/Public/ietf-http-wg/>.

XML versions, latest edits and the issues list for this document are available from <http://greenbytes.de/tech/webdav/#draft-reschke-rfc2231-in-http>. A collection of test cases is available at <http://greenbytes.de/tech/tc2231/>.


 I  auth48   (type: edit, status: closed)
julian.reschke@greenbytes.de2010-08-10 Umbrella issue for changes made during the RFC Editor's AUTH48 period.
Associated changes in this document: <#rfc.change.auth48.1>, <#rfc.change.auth48.2>, <#rfc.change.auth48.3>, <#rfc.change.auth48.4>, 1, 1, 1, 2, 2, 3.2, 3.2.1, 3.2.1, 3.2.1, 3.2.1, 3.2.1, 3.2.1, 3.2.2, 3.2.2, 3.2.2, 3.2.2, 3.2.2, 3.2.2, 3.2.2, 3.2.2, 3.2.2, 3.2.2, 3.3, 4, 4, 4.2, 4.2, <#rfc.change.auth48.32>, 6, 7.2, 7.2, <#rfc.change.auth48.36>, <#rfc.change.auth48.37>, del-15.

1. Introduction

By default, message header field parameters in HTTP ([RFC2616]) messages can I not carry characters outside the ISO-8859-1 character set ([ISO-8859-1]). RFC 2231 ([RFC2231]) defines an encoding mechanism for use in MIME headers. This document specifies an encoding suitable for use in HTTP header fields  I whichthat is compatible  I towith a profile of the encoding defined in RFC 2231.

2. Notational Conventions

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].

This specification uses the ABNF (Augmented Backus-Naur Form) notation defined in [RFC5234]. The following core rules are included by reference, as defined in [RFC5234], Appendix B.1: ALPHA (letters), DIGIT (decimal 0-9), HEXDIG (hexadecimal 0-9/A-F/a-f) I , and LWSP (linear white I space).

Note that this specification uses the term "character set" for consistency with other IETF specifications such as RFC 2277 (see [RFC2277], Section 3). A more accurate term would be "character encoding" (a mapping of code points to octet sequences).

3. Comparison to RFC 2231 and Definition of the Encoding

RFC 2231 defines several extensions to MIME. The sections below discuss if and how they apply to HTTP header fields.

In short:

3.1. Parameter Continuations

Section 3 of [RFC2231] defines a mechanism that deals with the length limitations that apply to MIME headers. These limitations do not apply to HTTP ([RFC2616], Section 19.4.7).

Thus, parameter continuations are not part of the encoding defined by this specification.

3.2. Parameter Value Character Set and Language Information

Section 4 of [RFC2231] specifies how to embed language information into parameter values, and also how to encode non-ASCII characters, dealing with restrictions both in MIME and HTTP header parameters.

However, RFC 2231 does not specify a mandatory-to-implement character set, making it hard for senders to decide which character set to use. Thus, recipients implementing this specification MUST support the character sets "ISO-8859-1" [ISO-8859-1] and "UTF-8" [RFC3629].

Furthermore, RFC 2231 allows  I leaving out the character set informationthe character set information to be left out. The encoding defined by this specification does not allow that.

3.2.1. Definition

The syntax for parameters is defined in Section 3.6 of [RFC2616] (with RFC 2616 implied LWS translated to RFC 5234 LWSP):

  parameter     = attribute LWSP "=" LWSP value
  attribute     = token
  value         = token / quoted-string

  quoted-string = <quoted-string, defined in [RFC2616], Section 2.2>
  token         = <token, defined in [RFC2616], Section 2.2>

In order to include character set and language information, this specification modifies the RFC 2616 grammar to I be:

  parameter     = reg-parameter / ext-parameter

  reg-parameter = parmname LWSP "=" LWSP value

  ext-parameter = parmname "*" LWSP "=" LWSP ext-value

  parmname      = 1*attr-char

  ext-value     = charset  "'" [ language ] "'" value-chars
                ; like RFC 2231's <extended-initial-value>
                ; (see [RFC2231], Section 7)

  charset       = "UTF-8" / "ISO-8859-1" / mime-charset

  mime-charset  = 1*mime-charsetc
  mime-charsetc = ALPHA / DIGIT
                / "!" / "#" / "$" / "%" / "&"
                / "+" / "-" / "^" / "_" / "`"
                / "{" / "}" / "~"
                ; as <mime-charset> in Section 2.3 of [RFC2978]
                ; except that the single quote is not included
                ; SHOULD be registered in the IANA charset registry

  language      = <Language-Tag, defined in [RFC5646], Section 2.1>

  value-chars   = *( pct-encoded / attr-char )

  pct-encoded   = "%" HEXDIG HEXDIG
                ; see [RFC3986], Section 2.1

  attr-char     = ALPHA / DIGIT
                / "!" / "#" / "$" / "&" / "+" / "-" / "."
                / "^" / "_" / "`" / "|" / "~"
                ; token except ( "*" / "'" / "%" )

Thus, a parameter is either  I aregular parameter (reg-parameter), as previously defined in Section 3.6 of [RFC2616], or an extended parameter (ext-parameter).

Extended parameters are those where the left I -hand side of the assignment ends with an asterisk character.

The value part of an extended parameter (ext-value) is a token that consists of three parts: the REQUIRED character set name (charset), the OPTIONAL language information (language), and a character sequence representing the actual value (value-chars), separated by single quote characters. Note that both character set names and language tags are restricted to the US-ASCII character set, and are matched case-insensitively (see [RFC2978], Section 2.3 and [RFC5646], Section 2.1.1).

Inside the value part, characters not contained in attr-char are encoded into an octet sequence using the specified character set. That octet sequence  I then isis then percent-encoded as specified in Section 2.1 of [RFC3986].

Producers MUST use either the "UTF-8" ([RFC3629]) or the "ISO-8859-1" ([ISO-8859-1]) character set. Extension character sets (mime-charset) are reserved for future use.

3.2.2. Examples

Non-extended notation, using "token":

  foo: bar; title=Economy

Non-extended notation, using "quoted-string":

  foo: bar; title="US-$ rates"

Extended notation, using the  I uUnicode character U+00A3 (POUND SIGN):

  foo: bar; title*=iso-8859-1'en'%A3%20rates

Note: the Unicode pound sign character U+00A3 was encoded  I using ISO-8859-1 into the single octet A3into the single octet A3 using the ISO-8859-1 character encoding, then percent-encoded. Also I , note that the space character was encoded as %20, as it is not contained in attr-char.

Extended notation, using the  I uUnicode characters U+00A3 (POUND SIGN) and U+20AC (EURO SIGN):

  foo: bar; title*=UTF-8''%c2%a3%20and%20%e2%82%ac%20rates

Note: the  I uUnicode pound sign character U+00A3 was encoded  I using UTF-8 into the octet sequence C2 A3into the octet sequence C2 A3 using the UTF-8 character encoding, then percent-encoded. Likewise, the  I uUnicode euro sign character U+20AC was encoded into the octet sequence E2 82 AC, then percent-encoded. Also note that HEXDIG allows both lower I -case and upper I -case character I s, so recipients must understand both, and that the language information is optional, while the character set is not.

3.3.  I Language specification in Encoded WordsLanguage Specification in Encoded Words

Section 5 of [RFC2231] extends the encoding defined in [RFC2047] to also support language specification in encoded words. Although the HTTP/1.1 specification does refer to RFC 2047 ([RFC2616], Section 2.2), it's not clear to which header field exactly it applies, and whether it is implemented in practice (see <http://tools.ietf.org/wg/httpbis/trac/ticket/111> for details).

Thus, this specification does not include this feature.

4. Guidelines for Usage in HTTP Header Field Definitions

Specifications of HTTP header fields that use the extensions defined in Section 3.2 ought to clearly state that. A simple way to achieve this is to normatively reference this specification, and to include the ext-value production into the ABNF for that header field.

For instance:

  foo-header  = "foo" LWSP ":" LWSP token ";" LWSP title-param
  title-param = "title" LWSP "=" LWSP value
              / "title*" LWSP "=" LWSP ext-value
  ext-value   = <see RFC I xxxx 5987, Section 3.2>
 I  

[rfcno: Note to RFC Editor: in the figure above, please replace "xxxx" by the RFC number assigned to this specification.]

4.1. When to Use the Extension

Section 4.2 of [RFC2277] requires that protocol elements containing human-readable text are able to carry language information. Thus, the ext-value production ought to be always used when the parameter value is of textual nature and its language is known.

Furthermore, the extension ought to also be used whenever the parameter value needs to carry characters not present in the US-ASCII ([USASCII]) character set (note that it would be unacceptable to define a new parameter that would be restricted to a subset of the Unicode character set).

4.2. Error Handling

Header field specifications need to define whether multiple instances of parameters with identical parmname components are allowed, and how they should I be processed. This specification suggests that a parameter using the extended syntax takes precedence. This  I could be used bywould allow producers to use both formats without breaking recipients that do not understand the extended syntax yet.

Example:

  foo: bar; title="EURO exchange rates";
            title*=utf-8''%e2%82%ac%20exchange%20rates

In this case, the sender provides an ASCII version of the title for legacy recipients, but also includes an internationalized version for recipients understanding this specification -- the latter obviously ought to prefer the new syntax over the old one.

5. Security Considerations

The format described in this document makes it possible to transport non-ASCII characters, and thus enables character "spoofing" scenarios, in which a displayed value appears to be something other than it is.

Furthermore, there are known attack scenarios relating to decoding UTF-8.

See Section 10 of [RFC3629] for more information on both topics.

In addition, the extension specified in this document makes it possible to transport multiple language variants for a single parameter, and such use might allow spoofing attacks, where different language versions of the same parameter are not equivalent. Whether this attack is useful as an attack depends on the parameter specified.

 I  

del-1. IANA Considerations

There are no IANA Considerations related to this specification.

6. Acknowledgements

Thanks to Martin Duerst and Frank Ellermann for help figuring out ABNF details, to Graham Klyne and Alexey Melnikov for general review, I to Chris Newman for pointing out an RFC 2231 incompatibility, and to Benjamin Carlyle and Roar Lauritzsen for implementer's feedback.

7. References

7.1. Normative References

[ISO-8859-1]
International Organization for Standardization, “Information technology -- 8-bit single-byte coded graphic character sets -- Part 1: Latin alphabet No. 1”, ISO/IEC 8859-1:1998, 1998.
[RFC2119]
Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels”, BCP 14, RFC 2119, March 1997.
[RFC2616]
Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1”, RFC 2616, June 1999.
[RFC2978]
Freed, N. and J. Postel, “IANA Charset Registration Procedures”, BCP 19, RFC 2978, October 2000.
[RFC3629]
Yergeau, F., “UTF-8, a transformation format of ISO 10646”, RFC 3629, STD 63, November 2003.
[RFC3986]
Berners-Lee, T., Fielding, R., and L. Masinter, “Uniform Resource Identifier (URI): Generic Syntax”, RFC 3986, STD 66, January 2005.
[RFC5234]
Crocker, D., Ed. and P. Overell, “Augmented BNF for Syntax Specifications: ABNF”, STD 68, RFC 5234, January 2008.
[RFC5646]
Phillips, A., Ed. and M. Davis, Ed., “Tags for Identifying Languages”, BCP 47, RFC 5646, September 2009.
[USASCII]
American National Standards Institute, “Coded Character Set -- 7-bit American Standard Code for Information Interchange”, ANSI X3.4, 1986.
 I  

del-2. Document History and Future Plans (to be removed by RFC Editor before publication)

Problems with the internationalization of the HTTP Content-Disposition header field have been known for many years (see test cases at <http://greenbytes.de/tech/tc2231/>).

During IETF 72 (<http://tools.ietf.org/wg/httpbis/minutes?item=minutes72.html>), the HTTPbis Working Group shortly discussed how to deal with the underspecification of (1) Content-Disposition, and its (2) internationalization aspects. Back then, there was rough consensus in the room to move the definition into a separate draft.

This specification addresses problem (2), by defining a simple subset of the encoding format defined in RFC 2231. A separate specification, draft-reschke-rfc2183-in-http, is planned to address problem (1). Note that this approach was chosen because Content-Disposition is just an example for an HTTP header field using this kind of encoding. Another example is the currently proposed Link header field (draft-nottingham-http-link-header).

This document is planned to be published on the IETF Standards Track, so that other standards-track level documents can depend on it, such as the new specification of Content-Disposition, or potentially future revisions of the HTTP Link Header specification.

Also note that this document specifies a proper subset of the extensions defined in RFC 2231, but does not normatively refer to it. Thus, RFC 2231 can be revised separately, should the email community decide to.

 I  

del-3. Change Log (to be removed by RFC Editor before publication)

del-4. Since draft-reschke-rfc2231-in-http-00

Use RFC5234-style ABNF, closer to the one used in RFC 2231.

Make RFC 2231 dependency informative, so this specification can evolve independently.

Explain the ABNF in prose.

del-5. Since draft-reschke-rfc2231-in-http-01

Remove unneeded RFC5137 notation (code point vs character).

del-6. Since draft-reschke-rfc2231-in-http-02

And and resolve issues "charset", "repeats" and "rfc4646".

del-7. Since draft-reschke-rfc2231-in-http-03

And and resolve issue "charsetmatch".

del-8. Since draft-reschke-rfc2231-in-http-04

Add and resolve issues "badseq" and "tokenquotcharset".

del-9. Since draft-reschke-rfc2231-in-http-05

Say "header field" instead of "header" in the context of HTTP.

del-10. Since draft-reschke-rfc2231-in-http-06

Add an appendix discussing document history and future plans, to be removed before publication.

del-11. Since draft-reschke-rfc2231-in-http-07

Add and resolve issues "impl" and "rel-2388".

del-12. Since draft-reschke-rfc2231-in-http-08

Editorial improvements. Add and resolve issues "attrcharvstoken" and "tokengrammar".

del-13. Since draft-reschke-rfc2231-in-http-09

Add issues "i18n-spoofing", "iso8859", "parameter-abnf", and "when-ext-value". Add and resolve issues "rfc2978-normative", "rfc3986-normative" and "usascii-normative".

del-14. Since draft-reschke-rfc2231-in-http-10

Resolve issues "i18n-spoofing", "iso8859", "parameter-abnf", and "when-ext-value".

Add and resolve issue "charset-registered", "handling-multiple", "multiple-inst-spoofing", "repeated-param" and "value-abnf".

Update the KDE implementation note.

del-15. Since draft-reschke-rfc2231-in-http-11

In the prose in Section 3.2, "ext-charset" -> "mime-charset". In Section 4, avoid the use of "should" and "recommended". In Section 4.1 clarify that the RFC 2277 requirement is about human-readable text. Clarify parts that made it look as if this spec has a normative dependency on RFC 2231 (new issue "nonorm2231").

del-16. Since draft-reschke-rfc2231-in-http-12

Include RFC-Editor's AUTH48 changes.

Author's Address

Julian F. Reschke
greenbytes GmbH
Hafenweg 16
Muenster, NW 48155
Germany
Email: julian.reschke@greenbytes.de
URI: http://greenbytes.de/tech/webdav/