HTTP Extensions for Distributed Authoring - WebDAV

Properties are pieces of data that describe the state of a resource. Properties are data about data.¶

Properties are used in distributed authoring environments to provide for efficient discovery and management of resources. For example, a 'subject' property might allow for the indexing of all resources by their subject, and an 'author' property might allow for the discovery of what authors have written which documents.¶

The DAV property model consists of name/value pairs. The name of a property identifies the property's syntax and semantics, and provides an address by which to refer to its syntax and semantics.¶

There are two categories of properties: "live" and "dead". A live property has its syntax and semantics enforced by the server. Live properties include cases where a) the value of a property is read-only, maintained by the server, and b) the value of the property is maintained by the client, but the server performs syntax checking on submitted values. All instances of a given live property MUST comply with the definition associated with that property name. A dead property has its syntax and semantics enforced by the client; the server merely records the value of the property verbatim.¶

Properties already exist, in a limited sense, in HTTP message headers. However, in distributed authoring environments a relatively large number of properties are needed to describe the state of a resource, and setting/returning them all through HTTP headers is inefficient. Thus a mechanism is needed which allows a principal to identify a set of properties in which the principal is interested and to set or retrieve just those properties.¶

The value of a property is always a (well-formed) XML fragment.¶

XML has been chosen because it is a flexible, self-describing, structured data format that supports rich schema definitions, and because of its support for multiple character sets. XML's self-describing nature allows any property's value to be extended by adding new elements. Older clients will not break when they encounter extensions because they will still have the data specified in the original schema and MUST ignore elements they do not understand.¶

XML's support for multiple character sets allows any human-readable property to be encoded and read in a character set familiar to the user. XML's support for multiple human languages, using the "xml:lang" attribute, handles cases where the same character set is employed by multiple human languages. Note that xml:lang scope is recursive, so a xml:lang attribute on any element containing a property name element applies to the property value unless it has been overridden by a more locally scoped attribute. Note that a property only has one value, in one language (or language MAY be left undefined), not multiple values in different languages or a single value in multiple languages.¶

• [namespace name]
• [local name]
• [attributes] named "xml:lang" or any such attribute in scope
• [children] of type element or character

• [namespace name]
• [local name]
• [attributes]
• [children] of type element or character

• [namespace name]
• [local name]
• [normalized value]

• [character code]

• [prefix]

XML Infoset attributes not listed above MAY be preserved by the server, but clients MUST NOT rely on them being preserved. The above rules would also apply by default to live properties, unless defined otherwise.¶

Servers MUST ignore the XML attribute xml:space if present and never use it to change white space handling. White space in property values is significant.¶

A property name is a universally unique identifier that is associated with a schema that provides information about the syntax and semantics of the property.¶

Because a property's name is universally unique, clients can depend upon consistent behavior for a particular property across multiple resources, on the same and across different servers, so long as that property is "live" on the resources in question, and the implementation of the live property is faithful to its definition.¶

The XML namespace mechanism, which is based on URIs ([RFC3986]), is used to name properties because it prevents namespace collisions and provides for varying degrees of administrative control.¶

The property namespace is flat; that is, no hierarchy of properties is explicitly recognized. Thus, if a property A and a property A/B exist on a resource, there is no recognition of any relationship between the two properties. It is expected that a separate specification will eventually be produced which will address issues relating to hierarchical properties.¶

Finally, it is not possible to define the same property twice on a single resource, as this would cause a collision in the resource's property namespace.¶

Some HTTP resources are dynamically generated by the server. For these resources, there presumably exists source code somewhere governing how that resource is generated. The relationship of source files to output HTTP resources may be one to one, one to many, many to one or many to many. There is no mechanism in HTTP to determine whether a resource is even dynamic, let alone where its source files exist or how to author them. Although this problem would usefully be solved, interoperable WebDAV implementations have been widely deployed without actually solving this problem, by dealing only with static resources. Thus, the source vs. output problem is not solved in this specification and has been deferred to a separate document.¶

The HTTP URL namespace is a hierarchical namespace where the hierarchy is delimited with the "/" character.¶

An HTTP URL namespace is said to be consistent if it meets the following conditions: for every URL in the HTTP hierarchy there exists a collection that contains that URL as an internal member. The root, or top-level collection of the namespace under consideration is exempt from the previous rule. The top-level collection of the namespace under consideration is not necessarily the collection identified by the absolute path '/', it may be identified by one or more path segments (e.g. /servlets/webdav/...)¶

Neither HTTP/1.1 nor WebDAV require that the entire HTTP URL namespace be consistent -- a WebDAV-compatible resource may not have a parent collection. However, certain WebDAV methods are prohibited from producing results that cause namespace inconsistencies.¶

Although implicit in [RFC2616] and [RFC3986], any resource, including collection resources, MAY be identified by more than one URI. For example, a resource could be identified by multiple HTTP URLs.¶

Collection resources differ from other resources in that they also act as containers. A collection is a resource whose state consists of at least a set of mappings between path segments and resources, and a set of properties on the collection itself. A collection MAY have additional state such as entity bodies returned by GET.¶

Any given internal member URL MUST only belong to the collection once, i.e., it is illegal to have multiple instances of the same URL in a collection. Properties defined on collections behave exactly as do properties on non-collection resources.¶

For all WebDAV compliant resources A and B, identified by URLs U and V, for which U is immediately relative to V, B MUST be a collection that has U as an internal member URL. So, if the resource with URL http://example.com/bar/blah is WebDAV compliant and if the resource with URL http://example.com/bar/ is WebDAV compliant then the resource with URL http://example.com/bar/ must be a collection and must contain URL http://example.com/bar/blah as an internal member.¶

Collection resources MAY list the URLs of non-WebDAV compliant children in the HTTP URL namespace hierarchy as internal members but are not required to do so. For example, if the resource with URL http://example.com/bar/blah is not WebDAV compliant and the URL http://example.com/bar/ identifies a collection then URL http://example.com/bar/blah may or may not be an internal member of the collection with URL http://example.com/bar/.¶

If a WebDAV compliant resource has no WebDAV compliant children in the HTTP URL namespace hierarchy then the WebDAV compliant resource is not required to be a collection.¶

There is a standing convention that when a collection is referred to by its name without a trailing slash, the server MAY handle the request as if the trailing slash were present. In this case it SHOULD return a Content-Location header in the response, pointing to the URL ending with the "/". For example, if a client invokes a method on http://example.com/blah (no trailing slash), the server may respond as if the operation were invoked on http://example.com/blah/ (trailing slash), and should return a Content-Location header with the value http://example.com/blah/. Wherever a server produces a URL referring to a collection, the server SHOULD include the trailing slash. In general clients SHOULD use the trailing slash form of collection names. If clients do not use the trailing slash form the client needs to be prepared to see a redirect response. Clients will find the DAV:resourcetype property more reliable than the URL to find out if a resource is a collection.¶

Clients MUST be able to support the case where WebDAV resources are contained inside non-WebDAV resources. For example, if a OPTIONS response from "http://example.com/servlet/dav/collection" indicates WebDAV support, the client cannot assume that "http://example.com/servlet/dav/" or its parent necessarily are WebDAV collections.¶

This section provides a concise model for how locking behaves. Later sections will provide more detail on some of the concepts and refer back to these model statements. Normative statements related to LOCK and UNLOCK handling can be found in the sections on those methods, whereas normative statements that cover any method are gathered here.¶

1. A lock either directly or indirectly locks a resource.
2. A resource becomes directly locked when a LOCK request to the URL of that resource creates a new lock. The "lock-root" of the new lock is that URL. If at the time of the request, the URL is not mapped to a resource, a new empty resource is created and directly locked.
3. An exclusive lock (Section 6.2) conflicts with any other kind of lock on the same resource, whether either lock is direct or indirect. A server MUST NOT create conflicting locks on a resource.
4. For a collection that is locked with an infinite depth lock L, all member resources are indirectly locked. Changes in membership of a such a collection affect the set of indirectly locked resources:
   • If an internal member resource is added to the collection, and if the new member resource does not already have a conflicting lock, then the resource MUST become indirectly locked by L.
   • If an internal member resource stops being a member of the collection, then the resource MUST no longer be indirectly locked by L.
5. Each lock is identified by a single unique lock token (Section 6.5).
6. An UNLOCK request deletes the lock with the specified lock token, provided that the request is addressed to a resource that is either directly or indirectly locked by that lock. After a lock is deleted, no resource is locked by that lock.
7. A lock token is "submitted" in a request when it appears in an If header (the Write Lock (Section 7) section discusses when token submission is required for write locks).
8. If a request causes the lock-root of any lock to become an unmapped URL, then the lock MUST also be deleted by that request.

The most basic form of lock is an exclusive lock. Exclusive locks avoid having to deal with content change conflicts, without requiring any coordination other than the methods described in this specification.¶

However, there are times when the goal of a lock is not to exclude others from exercising an access right but rather to provide a mechanism for principals to indicate that they intend to exercise their access rights. Shared locks are provided for this case. A shared lock allows multiple principals to receive a lock. Hence any principal with appropriate access can use the lock.¶

With shared locks there are two trust sets that affect a resource. The first trust set is created by access permissions. Principals who are trusted, for example, may have permission to write to the resource. Among those who have access permission to write to the resource, the set of principals who have taken out a shared lock also must trust each other, creating a (typically) smaller trust set within the access permission write set.¶

Starting with every possible principal on the Internet, in most situations the vast majority of these principals will not have write access to a given resource. Of the small number who do have write access, some principals may decide to guarantee their edits are free from overwrite conflicts by using exclusive write locks. Others may decide they trust their collaborators will not overwrite their work (the potential set of collaborators being the set of principals who have write permission) and use a shared lock, which informs their collaborators that a principal may be working on the resource.¶

The WebDAV extensions to HTTP do not need to provide all of the communications paths necessary for principals to coordinate their activities. When using shared locks, principals may use any out of band communication channel to coordinate their work (e.g., face-to-face interaction, written notes, post-it notes on the screen, telephone conversation, Email, etc.) The intent of a shared lock is to let collaborators know who else may be working on a resource.¶

Shared locks are included because experience from web distributed authoring systems has indicated that exclusive locks are often too rigid. An exclusive lock is used to enforce a particular editing process: take out an exclusive lock, read the resource, perform edits, write the resource, release the lock. This editing process has the problem that locks are not always properly released, for example when a program crashes, or when a lock creator leaves without unlocking a resource. While both timeouts (Section 6.6) and administrative action can be used to remove an offending lock, neither mechanism may be available when needed; the timeout may be long or the administrator may not be available.¶

A successful request for a new shared lock MUST result in the generation of a unique lock token associated with the requesting principal. Thus if five principals have taken out shared write locks on the same resource there will be five locks and five lock tokens, one for each principal.¶

A WebDAV compliant resource is not required to support locking in any form. If the resource does support locking it may choose to support any combination of exclusive and shared locks for any access types.¶

The reason for this flexibility is that locking policy strikes to the very heart of the resource management and versioning systems employed by various storage repositories. These repositories require control over what sort of locking will be made available. For example, some repositories only support shared write locks while others only provide support for exclusive write locks while yet others use no locking at all. As each system is sufficiently different to merit exclusion of certain locking features, this specification leaves locking as the sole axis of negotiation within WebDAV.¶

The creator of a lock has special privileges to use the locked resource. The server MUST restrict the usage of a lock token to the creator of the lock, both for shared and exclusive locks. For multi-user shared lock cases, each authenticated principal MUST obtain its own shared lock.¶

The server MAY allow privileged users other than the lock creator to destroy a lock (for example, the resource owner or an administrator) as a special case of lock usage.¶

If an anonymous user requests a lock, the server MAY refuse the request.¶

A lock token is a type of state token, represented as a URI, which identifies a particular lock. Each lock has exactly one unique lock token generated by the server. Clients MUST NOT attempt to interpret lock tokens in any way.¶

Lock token URIs MUST be unique across all resources for all time. This uniqueness constraint allows lock tokens to be submitted across resources and servers without fear of confusion. Since lock tokens are unique, a client MAY submit a lock token in an If header on a resource other than the one that returned it.¶

When a LOCK operation creates a new lock, the new lock token is returned in the Lock-Token response header defined in Section 10.5, and also in the body of the response.¶

Submitting a lock token does not confer full privilege to use the lock token or modify the locked resource. Write access and other privileges MUST be enforced through normal privilege or authentication mechanisms, not based on the possible obscurity of lock token values.¶

Servers MAY make lock tokens publicly readable (e.g. in the DAV:lockdiscovery property). One use case for making lock tokens readable is so that a long-lived lock can be removed by the resource owner (the client that obtained the lock might have crashed or disconnected before cleaning up the lock). Except for the case of using UNLOCK under user guidance, a client SHOULD NOT use a lock tokens created by another client instance.¶

This specification encourages servers to create UUIDs for lock tokens, and to use the URI form defined by "A Universally Unique Identifier (UUID) URN Namespace" ([RFC4122]). However servers are free to use any URI (e.g. from another scheme) so long as it meets the uniqueness requirements. For example, a valid lock token might be constructed using the "opaquelocktoken" scheme defined in Appendix C.¶

Example: "urn:uuid:f81d4fae-7dec-11d0-a765-00a0c91e6bf6"¶

A lock MAY have a limited lifetime. The lifetime is suggested by the client when creating or refreshing the lock, but the server ultimately chooses the timeout value. Servers MUST remove locks reasonably soon after the timeout expires if the lock is not refreshed and given a new timeout.¶

Clients MUST assume that locks may arbitrarily disappear at any time, regardless of the value given in the Timeout header. The Timeout header only indicates the behavior of the server if extraordinary circumstances do not occur. For example, a sufficiently privileged user may remove a lock at any time or the system may crash in such a way that it loses the record of the lock's existence.¶

Since server lock support is optional, a client trying to lock a resource on a server can either try the lock and hope for the best, or perform some form of discovery to determine what lock capabilities the server supports. This is known as lock capability discovery. A client can determine what lock types the server supports by retrieving the DAV:supportedlock property.¶

Any DAV compliant resource that supports the LOCK method MUST support the DAV:supportedlock property.¶

If another principal locks a resource that a principal wishes to access, it is useful for the second principal to be able to find out who the first principal is. For this purpose the DAV:lockdiscovery property is provided. This property lists all outstanding locks, describes their type, and MAY even provide the lock tokens.¶

Any DAV compliant resource that supports the LOCK method MUST support the DAV:lockdiscovery property.¶

A resource may be made available through more than one URI. A lock MUST cover the resource as well as the URI to which the LOCK request was addressed. The lock MAY cover other URIs mapped to the same resource as well.¶

While those without a write lock may not alter a property on a resource it is still possible for the values of live properties to change, even while locked, due to the requirements of their schemas. Only dead properties and live properties defined to respect locks are guaranteed not to change while write locked.¶

Two clients A and B are interested in editing the resource 'index.html'. Client A is an HTTP client rather than a WebDAV client, and so does not know how to perform locking.¶

Client A doesn't lock the document, but does a GET and begins editing.¶

Client B does LOCK, performs a GET and begins editing.¶

Client B finishes editing, performs a PUT, then an UNLOCK.¶

Client A performs a PUT, overwriting and losing all of B's changes.¶

There are several reasons why the WebDAV protocol itself cannot prevent this situation. First, it cannot force all clients to use locking because it must be compatible with HTTP clients that do not comprehend locking. Second, it cannot require servers to support locking because of the variety of repository implementations, some of which rely on reservations and merging rather than on locking. Finally, being stateless, it cannot enforce a sequence of operations like LOCK / GET / PUT / UNLOCK.¶

WebDAV servers that support locking can reduce the likelihood that clients will accidentally overwrite each other's changes by requiring clients to lock resources before modifying them. Such servers would effectively prevent HTTP 1.0 and HTTP 1.1 clients from modifying resources.¶

WebDAV clients can be good citizens by using a lock / retrieve / write /unlock sequence of operations (at least by default) whenever they interact with a WebDAV server that supports locking.¶

HTTP 1.1 clients can be good citizens, avoiding overwriting other clients' changes, by using entity tags in If-Match headers with any requests that would modify resources.¶

Information managers may attempt to prevent overwrites by implementing client-side procedures requiring locking before modifying WebDAV resources.¶

WebDAV provides the ability to lock an unmapped URL in order to reserve the name for use. This is a simple way to avoid the lost-update problem on the creation of a new resource (another way is to use If-None-Match header specified in HTTP 1.1). It has the side benefit of locking the new resource immediately for use of the creator.¶

Note that the lost-update problem is not an issue for collections because MKCOL can only be used to create a collection, not to overwrite an existing collection. When trying to lock a collection upon creation, clients may attempt to increase the likelihood of getting the lock by pipelining the MKCOL and LOCK requests together (but because this doesn't convert two separate operations into one atomic operation there's no guarantee this will work).¶

A successful lock request to an unmapped URL MUST result in the creation of an locked resource with empty content. Subsequently, a successful PUT request (with the correct lock token) provides the content for the resource, and a server that normally uses the client-provided content-type MUST also use the content-type and content-language information from this request.¶

The original WebDAV model for locking unmapped URLs created "lock-null resources". This model was over-complicated and some interoperability and implementation problems were discovered. The new WebDAV model for locking unmapped URLs creates "locked empty resources". Servers MUST implement either lock-null resources or locked empty resources, but servers SHOULD implement locked empty resources. This section discusses the original model briefly and the new model more completely, because clients MUST be able to handle either model.¶

• A lock-null resource sometimes appeared as "Not Found". The server responds with a 404 or 405 to any method except for PUT, MKCOL, OPTIONS, PROPFIND, LOCK, UNLOCK.
• A lock-null resource does however show up as a member of its parent collection.
• The server removes the lock-null resource entirely (its URI becomes unmapped) if its lock goes away before it is converted to a regular resource. Recall that locks go away not only when they expire or are unlcoked, but are also removed if a resource is renamed or moved, or if any parent collection is renamed or moved.
• The server converts the lock-null resource into a regular resource if a PUT request to the URL is successful.
• The server converts the lock-null resource into a collection if a MKCOL request to the URL is successful (though interoperability experience showed that not all servers followed this requirement).
• Property values were defined for DAV:lockdiscovery and DAV:supportedlock properties but not necessarily for other properties like DAV:getcontenttype.

• Can be read, deleted, moved, copied, and in all ways behave as a regular resource, not a lock-null resource.
• Appears as a member of its parent collection.
• SHOULD NOT disappear when its lock goes away (clients must therefore be responsible for cleaning up their own mess, as with any other operation or any non-empty resource)
• MAY NOT have values for properties like DAV:getcontentlanguage which haven't been specified yet by the client.
• Can be updated (have content added) with a PUT request.
• MUST NOT be converted into a collection. The server MUST fail a MKCOL request (as it would with a MKCOL request to any existing non-collection resource).
• MUST have defined values for DAV:lockdiscovery and DAV:supportedlock properties.
• The response MUST indicate that a resource was created, by use of the "201 Created" response code (a LOCK request to an existing resource instead will result in 200 OK). The body must still include the DAV:lockdiscovery property, as with a LOCK request to an existing resource.

The client is expected to update the locked empty resource shortly after locking it, using PUT and possibly PROPPATCH.¶

Clients can easily interoperate both with servers that support the old model "lock-null resources" and the recommended model of "locked empty resources" by only attempting PUT after a LOCK to an unmapped URL, not MKCOL or GET.¶

A write lock on a collection, whether created by a "Depth: 0" or "Depth: infinity" lock request, prevents the addition or removal of member URLs of the collection by principals other than the lock creator.¶

A zero-depth lock on a collection affects changes to the direct membership of that collection. When a principal issues a write request to create a new resource in a write locked collection, or isses a DELETE, MOVE or other request that would remove an existing internal member URL of a write locked collection or change the binding name, this request MUST fail if the principal does not provide the correct lock token for the locked collection.¶

• DELETE a collection's direct internal member
• MOVE a member out of the collection
• MOVE a member into the collection
• MOVE to rename a member within a collection
• COPY a member into a collection
• PUT or MKCOL request which would create a new member.

The collection's lock token is required in addition to the lock token on the internal member itself, if it is locked separately.¶

In addition, a depth-infinity lock affects all write operations to all descendents of the locked collection. With a depth-infinity lock, the root of the lock is directly locked, and all its descendants are indirectly locked.¶

• Any new resource added as a descendent of a depth-infinity locked collection becomes indirectly locked.
• Any indirectly locked resource moved out of the locked collection into an unlocked collection is thereafter unlocked.
• Any indirectly locked resource moved out of a locked source collection into a depth-infinity locked target collection remains indirectly locked but is now within the scope of the lock on the target collection (the target collection's lock token will thereafter be required to make further changes).

If a depth-infinity write LOCK request is issued to a collection containing member URLs identifying resources that are currently locked in a manner which conflicts with the new lock (see Section 6.1 point 3), the request MUST fail with a 423 (Locked) status code, and the response SHOULD contain the 'no-conflicting-lock' precondition.¶

If a lock creator causes the URL of a resource to be added as an internal member URL of a depth-infinity locked collection then the new resource MUST be automatically added to the lock. This is the only mechanism that allows a resource to be added to a write lock. Thus, for example, if the collection /a/b/ is write locked and the resource /c is moved to /a/b/c then resource /a/b/c will be added to the write lock.¶

If a user agent is not required to have knowledge about a lock when requesting an operation on a locked resource, the following scenario might occur. Program A, run by User A, takes out a write lock on a resource. Program B, also run by User A, has no knowledge of the lock taken out by Program A, yet performs a PUT to the locked resource. In this scenario, the PUT succeeds because locks are associated with a principal, not a program, and thus program B, because it is acting with principal A's credential, is allowed to perform the PUT. However, had program B known about the lock, it would not have overwritten the resource, preferring instead to present a dialog box describing the conflict to the user. Due to this scenario, a mechanism is needed to prevent different programs from accidentally ignoring locks taken out by other programs with the same authorization.¶

In order to prevent these collisions a lock token MUST be submitted by an authorized principal for all locked resources that a method may change or the method MUST fail. A lock token is submitted when it appears in an If header. For example, if a resource is to be moved and both the source and destination are locked then two lock tokens must be submitted in the if header, one for the source and the other for the destination.¶

A COPY method invocation MUST NOT duplicate any write locks active on the source. However, as previously noted, if the COPY copies the resource into a collection that is locked with "Depth: infinity", then the resource will be added to the lock.¶

A successful MOVE request on a write locked resource MUST NOT move the write lock with the resource. However, if there is an existing lock at the destination, the server MUST add the moved resource to the destination lock scope. For example, if the MOVE makes the resource a child of a collection that is locked with "Depth: infinity", then the resource will be added to that collection's lock. Additionally, if a resource locked with "Depth: infinity" is moved to a destination that is within the scope of the same lock (e.g., within the URL namespace tree covered by the lock), the moved resource will again be a added to the lock. In both these examples, as specified in Section 7.5, an If header must be submitted containing a lock token for both the source and destination.¶

A client MUST NOT submit the same write lock request twice. Note that a client is always aware it is resubmitting the same lock request because it must include the lock token in the If header in order to make the request for a resource that is already locked.¶

However, a client may submit a LOCK method with an If header but without a body. This form of LOCK MUST only be used to "refresh" a lock. Meaning, at minimum, that any timers associated with the lock MUST be re-set.¶

A server may return a Timeout header with a lock refresh that is different than the Timeout header returned when the lock was originally requested. Additionally clients may submit Timeout headers of arbitrary value with their lock refresh requests. Servers, as always, may ignore Timeout headers submitted by the client. Note that timeout is measured in seconds remaining until expiration.¶

If an error is received in response to a refresh LOCK request the client MUST NOT assume that the lock was refreshed.¶

In HTTP/1.1, method parameter information was exclusively encoded in HTTP headers. Unlike HTTP/1.1, WebDAV encodes method parameter information either in an [XML] request entity body, or in an HTTP header. The use of XML to encode method parameters was motivated by the ability to add extra XML elements to existing structures, providing extensibility; and by XML's ability to encode information in ISO 10646 character sets, providing internationalization support.¶

In addition to encoding method parameters, XML is used in WebDAV to encode the responses from methods, providing the extensibility and internationalization advantages of XML for method output, as well as input.¶

All DAV compliant clients and resources MUST use XML parsers that are compliant with [XML] and XML Namespaces [W3C.REC-xml-names-19990114]. All XML used in either requests or responses MUST be, at minimum, well formed and use namespaces correctly. If a server receives XML that is not well-formed then the server MUST reject the entire request with a 400 (Bad Request). If a client receives XML that is not well-formed in a response then the client MUST NOT assume anything about the outcome of the executed method and SHOULD treat the server as malfunctioning.¶

Note that processing XML submitted by an untrusted source may cause risks connected to privacy, security, and service quality (see Section 20). Servers MAY reject questionable requests (even though they consist of well-formed XML), for instance with a 400 (Bad Request) status code and an optional response body explaining the problem.¶

URLs appear in many places in requests and responses. Interoperability experience with [RFC2518] showed that many clients parsing Multi-Status responses did not fully implement the full Reference Resolution defined in Section 5 of [RFC3986]. Thus, servers in particular need to be careful in handling URLs in responses, to ensure that clients have enough context to be able to interpret all the URLs. The rules in this section apply not only to resource URLs in the 'href' element in Multi-Status responses, but also to the Destination and If header resource URLs.¶

The sender has a choice between two approaches: using a relative reference, which is resolved against the Request-URI, or a full URI. A sender SHOULD generally be consistent once it has chosen one of these approaches, but a server MUST ensure that every 'href' value within a Multi-Status response uses the same format.¶

WebDAV only uses one form of relative reference in its extensions, the absolute path.¶

The absolute-URI and path-absolute productions are defined in section 4.3 and 4.1 of [RFC3986].¶

Within Simple-ref productions, senders MUST NOT: ¶

• use dot-segments ("." or ".."), or
• have prefixes that do not match the Request-URI (using the comparison rules defined in Section 3.2.3 of [RFC2616]).

Identifiers for collections SHOULD end in a '/' character.¶

Some of these new methods do not define bodies. Servers MUST examine all requests for a body, even when a body was not expected. In cases where a request body is present but would be ignored by a server, the server MUST reject the request with 415 (Unsupported Media Type). This informs the client (which may have been attempting to use an extension) that the body could not be processed as they intended.¶

HTTP defines many headers that can be used in WebDAV requests and responses. Not all of these are appropriate in all situations and some interactions may be undefined. Note that HTTP 1.1 requires the Date header in all responses if possible (see section 14.18, [RFC2616]).¶

The server MUST do authorization checks before checking any HTTP conditional header.¶

HTTP 1.1 recommends the use of the ETag header in responses to GET and PUT requests. Correct use of ETags is even more important in a distributed authoring environment, because ETags are necessary along with locks to avoid the lost-update problem. A client might fail to renew a lock, for example when the lock times out and the client is accidentally offline or in the middle of a long upload. When a client fails to renew the lock, it's quite possible the resource can still be relocked and the user can go on editing, as long as no changes were made in the meantime. ETags are required for the client to be able to distinguish this case. Otherwise, the client is forced to ask the user whether to overwrite the resource on the server without even being able to tell the user whether it has changed. Timestamps do not solve this problem nearly as well as ETags.¶

Strong ETags are much more useful for authoring use cases than weak ETags. Semantic equivalence can be a useful concept but that depends on the document type and the application type, and interoperability might require some agreement or standard outside the scope of this specification and HTTP. Note also that weak ETags have certain restrictions in HTTP, e.g. these cannot be used in If-Match headers.¶

Note that the meaning of an ETag in a PUT response is not clearly defined either in this document or in RFC2616 (i.e., whether the ETag means that the resource is octet-for-octet equivalent to the body of the PUT request, or whether the server could have made minor changes in the formatting or content of the document upon storage). It is hoped that future specification work will clarify this confusion.¶

Because clients may be forced to prompt users or throw away changed content if the ETag changes, a WebDAV server SHOULD NOT change the ETag (or the Last-Modified time) for a resource that has an unchanged body and location. The ETag represents the state of the body or contents of the resource. There is no similar way to tell if properties have changed.¶

HTTP and WebDAV did not use the bodies of most error responses for machine-parsable information until DeltaV introduced a mechanism to include more specific information in the body of an error response (section 1.6 of [RFC3253]). The error body mechanism is appropriate to use with any error response that may take a body but does not already have a body defined. The mechanism is particularly appropriate when a status code can mean many things (for example, 400 Bad Request can mean required headers are missing, headers are incorrectly formatted, or much more). This error body mechanism is covered in Section 16 ¶

• For any given URL, the "Last-Modified" value MUST increment every time the representation returned upon GET changes (within the limits of timestamp resolution).
• For any given URL, an "ETag" value MUST NOT be re-used for different representations returned by GET.

In practice this means that servers¶

• might have to increment "Last-Modified" timestamps for every resource inside the destination namespace of a namespace operation unless it can do so more selectively, and
• similarily, might have to re-assign "ETag" values for these resources (unless the server allocates entity tags in a way so that they are unique across the whole URL namespace managed by the server).

Note that these considerations also apply to specific use cases, such as using PUT to create a new resource at a URL that has been mapped before, but has been deleted since then.¶

Finally, WebDAV properties (such as DAV:getetag and DAV: getlastmodified) that inherit their semantics from HTTP headers must behave accordingly.¶

The PROPFIND method retrieves properties defined on the resource identified by the Request-URI, if the resource does not have any internal members, or on the resource identified by the Request-URI and potentially its member resources, if the resource is a collection that has internal member URLs. All DAV compliant resources MUST support the PROPFIND method and the propfind XML element (Section 14.20) along with all XML elements defined for use with that element.¶

A client may submit a Depth header with a value of "0", "1", or "infinity" with a PROPFIND on a collection resource. Servers MUST support "0" and "1" depth requests on WebDAV-compliant resources and SHOULD support "infinity" requests. In practice, support for depth infinity requests MAY be disabled, due to the performance and security concerns associated with this behavior. By default, the PROPFIND method without a Depth header MUST act as if a "Depth: infinity" header was included.¶

• Request particular property values, by naming the properties desired within the 'prop' element (the ordering of properties in here MAY be ignored by server),
• Request property values for those properties defined in this specification plus dead properties, by using the 'allprop' element (the 'include' element can be used with 'allprop' to instruct the server to also include additional live properties that may not have been returned otherwise),
• Request a list of names of all the properties defined on the resource, by using the 'propname' element.

A client may choose not to submit a request body. An empty PROPFIND request body MUST be treated as if it were an 'allprop' request.¶

Note that 'allprop' does not return values for all live properties. WebDAV servers increasingly have expensively-calculated or lengthy properties (see [RFC3253] and [RFC3744]) and do not return all properties already. Instead, WebDAV clients can use propname requests to discover what live properties exist, and request named properties when retrieving values. For a live property defined elsewhere, that definition can specify whether that live property would be returned in 'allprop' requests or not.¶

All servers MUST support returning a response of content type text/xml or application/xml that contains a multistatus XML element that describes the results of the attempts to retrieve the various properties.¶

If there is an error retrieving a property then a proper error result MUST be included in the response. A request to retrieve the value of a property which does not exist is an error and MUST be noted, if the response uses a 'multistatus' XML element, with a 'response' XML element which contains a 404 (Not Found) status value.¶

Consequently, the 'multistatus' XML element for a collection resource with member URLs MUST include a 'response' XML element for each member URL of the collection, to whatever depth was requested. Each 'response' XML element MUST contain an 'href' XML element that contains the URL of the resource on which the properties in the prop XML element are defined. Results for a PROPFIND on a collection resource with internal member URLs are returned as a flat list whose order of entries is not significant. Note that a resource may have only one value for a property of a given name, so the property may only show up once in PROPFIND responses.¶

Properties may be subject to access control. In the case of 'allprop' and 'propname' requests, if a principal does not have the right to know whether a particular property exists then the property MAY be silently excluded from the response.¶

Some PROPFIND results MAY be cached, with care as there is no cache validation mechanism for most properties. This method is both safe and idempotent (see section 9.1 of [RFC2616]).¶

The PROPPATCH method processes instructions specified in the request body to set and/or remove properties defined on the resource identified by the Request-URI.¶

All DAV compliant resources MUST support the PROPPATCH method and MUST process instructions that are specified using the propertyupdate, set, and remove XML elements. Execution of the directives in this method is, of course, subject to access control constraints. DAV compliant resources SHOULD support the setting of arbitrary dead properties.¶

The request message body of a PROPPATCH method MUST contain the propertyupdate XML element. Clients SHOULD NOT alter the same property more than once in a single PROPPATCH request.¶

Servers MUST process PROPPATCH instructions in document order (an exception to the normal rule that ordering is irrelevant). Instructions MUST either all be executed or none executed. Thus if any error occurs during processing all executed instructions MUST be undone and a proper error result returned. Instruction processing details can be found in the definition of the set and remove instructions in Section 14.23 and Section 14.26.¶

This method is idempotent, but not safe (see section 9.1 of [RFC2616]). Responses to this method MUST NOT be cached.¶

The MKCOL method is used to create a new collection. All WebDAV compliant resources MUST support the MKCOL method.¶

MKCOL creates a new collection resource at the location specified by the Request-URI. If the Request-URI is already mapped to a resource then the MKCOL MUST fail. During MKCOL processing, a server MUST make the Request-URI a member of its parent collection, unless the Request-URI is "/". If no such ancestor exists, the method MUST fail. When the MKCOL operation creates a new collection resource, all ancestors MUST already exist, or the method MUST fail with a 409 (Conflict) status code. For example, if a request to create collection /a/b/c/d/ is made, and /a/b/c/ does not exist, the request must fail.¶

When MKCOL is invoked without a request body, the newly created collection SHOULD have no members.¶

A MKCOL request message may contain a message body. The precise behavior of a MKCOL request when the body is present is undefined, but limited to creating collections, members of a collection, bodies of members and properties on the collections or members. If the server receives a MKCOL request entity type it does not support or understand it MUST respond with a 415 (Unsupported Media Type) status code. If the server decides to reject the request based on the presence of an entity or the type of an entity, it should use the 415 (Unsupported Media Type) status code.¶

This method is idempotent, but not safe (see section 9.1 of [RFC2616]). Responses to this method MUST NOT be cached.¶

The semantics of GET are unchanged when applied to a collection, since GET is defined as, "retrieve whatever information (in the form of an entity) is identified by the Request-URI" [RFC2616]. GET when applied to a collection may return the contents of an "index.html" resource, a human-readable view of the contents of the collection, or something else altogether. Hence it is possible that the result of a GET on a collection will bear no correlation to the membership of the collection.¶

Similarly, since the definition of HEAD is a GET without a response message body, the semantics of HEAD are unmodified when applied to collection resources.¶

Since by definition the actual function performed by POST is determined by the server and often depends on the particular resource, the behavior of POST when applied to collections cannot be meaningfully modified because it is largely undefined. Thus the semantics of POST are unmodified when applied to a collection.¶

DELETE is defined in [RFC2616], section 9.7, to "delete the resource identified by the Request-URI". However, WebDAV changes some DELETE handling requirements.¶

A server processing a successful DELETE request: ¶

• MUST destroy locks rooted on the deleted resource
• MUST remove the mapping from the Request-URI to any resource.

Thus, after a successful DELETE operation (and in the absence of other actions) a subsequent GET/HEAD/PROPFIND request to the target Request-URI MUST return 404 (Not Found).

The COPY method creates a duplicate of the source resource identified by the Request-URI, in the destination resource identified by the URI in the Destination header. The Destination header MUST be present. The exact behavior of the COPY method depends on the type of the source resource.¶

All WebDAV compliant resources MUST support the COPY method. However, support for the COPY method does not guarantee the ability to copy a resource. For example, separate programs may control resources on the same server. As a result, it may not be possible to copy a resource to a location that appears to be on the same server.¶

This method is idempotent, but not safe (see section 9.1 of [RFC2616]). Responses to this method MUST NOT be cached.¶

The MOVE operation on a non-collection resource is the logical equivalent of a copy (COPY), followed by consistency maintenance processing, followed by a delete of the source, where all three actions are performed atomically. The consistency maintenance step allows the server to perform updates caused by the move, such as updating all URLs other than the Request-URI which identify the source resource, to point to the new destination resource. Consequently, the Destination header MUST be present on all MOVE methods and MUST follow all COPY requirements for the COPY part of the MOVE method. All WebDAV compliant resources MUST support the MOVE method. However, support for the MOVE method does not guarantee the ability to move a resource to a particular destination.¶

For example, separate programs may actually control different sets of resources on the same server. Therefore, it may not be possible to move a resource within a namespace that appears to belong to the same server.¶

If a resource exists at the destination, the destination resource will be deleted as a side-effect of the MOVE operation, subject to the restrictions of the Overwrite header.¶

This method is idempotent, but not safe (see section 9.1 of [RFC2616]). Responses to this method MUST NOT be cached.¶

The following sections describe the LOCK method, which is used to take out a lock of any access type and to refresh an existing lock. These sections on the LOCK method describe only those semantics that are specific to the LOCK method and are independent of the access type of the lock being requested.¶

Any resource which supports the LOCK method MUST, at minimum, support the XML request and response formats defined herein.¶

This method is neither idempotent nor safe (see section 9.1 of [RFC2616]). Responses to this method MUST NOT be cached.¶

The UNLOCK method removes the lock identified by the lock token in the Lock-Token request header. The Request-URI MUST identify a resource within the scope of the lock.¶

Note that use of Lock-Token header to provide the lock token is not consistent with other state-changing methods which all require an If header with the lock token. Thus, the If header is not needed to provide the lock token. Naturally when the If header is present it has its normal meaning as a conditional header.¶

For a successful response to this method, the server MUST remove the lock from the resource identified by the Request-URI and from all other resources included in the lock.¶

If all resources which have been locked under the submitted lock token can not be unlocked then the UNLOCK request MUST fail.¶

A successful response to an UNLOCK method does not mean that the resource is necessarily unlocked. It means that the specific lock corresponding to the specified token no longer exists.¶

Any DAV compliant resource which supports the LOCK method MUST support the UNLOCK method.¶

This method is idempotent, but not safe (see section 9.1 of [RFC2616]). Responses to this method MUST NOT be cached.¶

This general-header appearing in the response indicates that the resource supports the DAV schema and protocol as specified. All DAV compliant resources MUST return the DAV header with compliance-class "1" on all OPTIONS responses. In cases where WebDAV is only supported in part of the server namespace, an OPTIONS request to non-WebDAV resources (including "/") SHOULD NOT advertise WebDAV support.¶

The value is a comma-separated list of all compliance class identifiers that the resource supports. Class identifiers may be Coded-URLs or tokens (as defined by [RFC2616]). Identifiers can appear in any order. Identifiers that are standardized through the IETF RFC process are tokens, but other identifiers SHOULD be Coded-URLs to encourage uniqueness.¶

A resource must show class 1 compliance if it shows class 2 or 3 compliance. In general, support for one compliance class does not entail support for any other, and in particular, support for compliance class 3 does not require support for compliance class 2. Please refer to Section 18 for more details on compliance classes defined in this specification.¶

Note that many WebDAV servers do not advertise WebDAV support in response to "OPTIONS *".¶

As a request header, this header allows the client to advertise compliance with named features when the server needs that information. Clients SHOULD NOT send this header unless a standards track specification requires it. Any extension that makes use of this as a request header will need to carefully consider caching implications.¶

The Depth request header is used with methods executed on resources which could potentially have internal members to indicate whether the method is to be applied only to the resource ("Depth: 0"), to the resource and its immediate children, ("Depth: 1"), or the resource and all its progeny ("Depth: infinity").¶

The Depth header is only supported if a method's definition explicitly provides for such support.¶

The following rules are the default behavior for any method that supports the Depth header. A method may override these defaults by defining different behavior in its definition.¶

Methods which support the Depth header may choose not to support all of the header's values and may define, on a case by case basis, the behavior of the method if a Depth header is not present. For example, the MOVE method only supports "Depth: infinity" and if a Depth header is not present will act as if a "Depth: infinity" header had been applied.¶

Clients MUST NOT rely upon methods executing on members of their hierarchies in any particular order or on the execution being atomic unless the particular method explicitly provides such guarantees.¶

Upon execution, a method with a Depth header will perform as much of its assigned task as possible and then return a response specifying what it was able to accomplish and what it failed to do.¶

So, for example, an attempt to COPY a hierarchy may result in some of the members being copied and some not.¶

By default, the Depth header does not interact with other headers. That is, each header on a request with a Depth header MUST be applied only to the Request-URI if it applies to any resource, unless specific Depth behavior is defined for that header.¶

If a resource, source or destination, within the scope of the method with a Depth header is locked in such a way as to prevent the successful execution of the method, then the lock token for that resource MUST be submitted with the request in the If request header.¶

The Depth header only specifies the behavior of the method with regards to internal children. If a resource does not have internal children then the Depth header MUST be ignored.¶

Please note, however, that it is always an error to submit a value for the Depth header that is not allowed by the method's definition. Thus submitting a "Depth: 1" on a COPY, even if the resource does not have internal members, will result in a 400 (Bad Request). The method should fail not because the resource doesn't have internal members, but because of the illegal value in the header.¶

The Destination request header specifies the URI which identifies a destination resource for methods such as COPY and MOVE, which take two URIs as parameters.¶

If the Destination value is an absolute URI, it may name a different server (or different port or scheme). If the source server cannot attempt a copy to the remote server, it MUST fail the request with a 502 (Bad Gateway) response.¶

If the Destination value is too long or otherwise unacceptable, the server SHOULD return 400 (Bad Request), ideally with helpful information in an error body.¶

The If request header is intended to have similar functionality to the If-Match header defined in section 14.24 of [RFC2616]. However the If header is intended for use with any URI which represents state information, referred to as a state token, about a resource as well as ETags. A typical example of a state token is a lock token, and lock tokens are the only state tokens defined in this specification. The <DAV:no-lock> state token is an example of a state token that will never match an actual valid lock token (not that it's special in this regard). The purpose of this is described in Section 10.4.4.¶

The If header's purpose is to describe a series of state lists. If the state of the resource to which the header is applied does not match any of the specified state lists then the request MUST fail with a 412 (Precondition Failed). If one of the described state lists matches the state of the resource then the request may succeed.¶

The server MUST do authorization checks before checking this or any conditional header. Assuming no other errors, the server MUST parse the If header when it appears on any request, evaluate all the clauses, and if the conditional evaluates to false, fail as described above.¶

The Lock-Token request header is used with the UNLOCK method to identify the lock to be removed. The lock token in the Lock-Token request header MUST identify a lock that contains the resource identified by Request-URI as a member.¶

The Lock-Token response header is used with the LOCK method to indicate the lock token created as a result of a successful LOCK request to create a new lock.¶

The Overwrite request header specifies whether the server should overwrite a resource mapped to the destination URL during a COPY or MOVE. A value of "F" states that the server must not perform the COPY or MOVE operation if the state of the destination URL does map to a resource. If the overwrite header is not included in a COPY or MOVE request then the resource MUST treat the request as if it has an overwrite header of value "T". While the Overwrite header appears to duplicate the functionality of the If-Match: * header of HTTP/1.1, If-Match applies only to the Request-URI, and not to the Destination of a COPY or MOVE.¶

If a COPY or MOVE is not performed due to the value of the Overwrite header, the method MUST fail with a 412 (Precondition Failed) status code. The server MUST do authorization checks before checking this or any conditional header.¶

All DAV compliant resources MUST support the Overwrite header.¶

Clients may include Timeout request headers in their LOCK requests. However, the server is not required to honor or even consider these requests. Clients MUST NOT submit a Timeout request header with any method other than a LOCK method.¶

Timeout response values MUST use a Second value or Infinite.¶

The "Second" TimeType specifies the number of seconds that will elapse between granting of the lock at the server, and the automatic removal of the lock. The timeout value for TimeType "Second" MUST NOT be greater than 2^32-1.¶

The timeout counter MUST be restarted if a refresh LOCK request is successful. The timeout counter SHOULD NOT be restarted at any other time.¶

If the timeout expires then the lock may be lost. Specifically, if the server wishes to harvest the lock upon time-out, the server SHOULD act as if an UNLOCK method was executed by the server on the resource using the lock token of the timed-out lock, performed with its override authority. Thus logs should be updated with the disposition of the lock, notifications should be sent, etc., just as they would be for an UNLOCK request.¶

Servers are advised to pay close attention to the values submitted by clients, as they will be indicative of the type of activity the client intends to perform. For example, an applet running in a browser may need to lock a resource, but because of the instability of the environment within which the applet is running, the applet may be turned off without warning. As a result, the applet is likely to ask for a relatively small timeout value so that if the applet dies, the lock can be quickly harvested. However, a document management system is likely to ask for an extremely long timeout because its user may be planning on going off-line.¶

A client MUST NOT assume that just because the time-out has expired the lock has been lost. Likewise, a client MUST NOT assume that just because the time-out has not expired, the lock still exists (and for this reason, clients are strongly advised to use ETags as well).¶

The 207 (Multi-Status) status code provides status for multiple independent operations (see Section 13 for more information).¶

The 422 (Unprocessable Entity) status code means the server understands the content type of the request entity (hence a 415(Unsupported Media Type) status code is inappropriate), and the syntax of the request entity is correct (thus a 400 (Bad Request) status code is inappropriate) but was unable to process the contained instructions. For example, this error condition may occur if an XML request body contains well-formed (i.e., syntactically correct), but semantically erroneous XML instructions.¶

The 423 (Locked) status code means the source or destination resource of a method is locked. This response SHOULD contain an appropriate precondition or postcondition code, such as 'lock-token-submitted' or 'no-conflicting-lock".¶

The 424 (Failed Dependency) status code means that the method could not be performed on the resource because the requested action depended on another action and that action failed. For example, if a command in a PROPPATCH method fails then, at minimum, the rest of the commands will also fail with 424 (Failed Dependency).¶

The 507 (Insufficient Storage) status code means the method could not be performed on the resource because the server is unable to store the representation needed to successfully complete the request. This condition is considered to be temporary. If the request which received this status code was the result of a user action, the request MUST NOT be repeated until it is requested by a separate user action.¶

Any request can contain a conditional header defined in HTTP (If-Match, If-Modified-Since, etc.) or the "If" or "Overwrite" conditional headers defined in this specification. If the server evaluates a conditional header, and if that condition fails to hold, then this error code MUST be returned. On the other hand, if the client did not include a conditional header in the request, then the server MUST NOT use this error.¶

This status code is used in HTTP 1.1 only for Request-URIs, not URIs in other locations.¶

HTTP defines the Location header to indicate a preferred URL for the resource that was addressed in the Request-URI (e.g. in response to successful PUT requests or in redirect responses). However, use of this header creates ambiguity when there are URLs in the body of the response, as with Multi-Status. Thus, use of the Location header with the Multi-Status response is intentionally undefined.¶

Redirect responses (300-303, 305 and 307) defined in HTTP 1.1 normally take a Location header to indicate the new URI for the single resource redirected from the Request-URI. Multi-Status responses contain many resource addresses, but the original definition in RFC2518 did not have any place for the server to provide the new URI for redirected resources. This specification does define a 'location' element for this information (see Section 14.9). Servers MUST use this new element with redirect responses in Multi-Status.¶

Clients encountering redirected resources in Multi-Status MUST NOT rely on the 'location' element being present with a new URI. If the element is not present, the client MAY reissue the request to the individual redirected resource, because the response to that request can be redirected with a Location header containing the new URI.¶

Section 9.2.1, Section 9.1.2, Section 9.6.1, Section 9.8.3 and Section 9.9.2 define various status codes used in Multi-Status responses. This specification does not define the meaning of other status codes that could appear in these responses.¶

Name:

activelock

Purpose:

Describes a lock on a resource.

Name:

allprop

Purpose:

Specifies that all names and values of dead properties and the live properties defined by this document existing on the resource are to be returned.

Name:

collection

Purpose:

Identifies the associated resource as a collection. The DAV:resourcetype property of a collection resource MUST contain this element. It is normally empty but extensions may add sub-elements.

Name:

depth

Purpose:

The value of the Depth header.

Value:

"0" | "1" | "infinity"

Name:

error

Purpose:

Error responses, particularly 403 Forbidden and 409 Conflict, sometimes need more information to indicate what went wrong. When an error response contains a body in WebDAV, the body is in XML with the root element 'error'. The 'error' element SHOULD include an XML element with the code of a failed precondition or postcondition.

Description:

Contains at least one XML element, and MUST NOT contain text or mixed content. Any element that is a child of the 'error' element is considered to be a precondition or postcondition code. Unrecognized elements SHOULD be ignored.

Name:

exclusive

Purpose:

Specifies an exclusive lock

Name:

href

Purpose:

MUST contain a URI or a relative reference.

Description:

There may be limits on the value of 'href' depending on the context of its use. Refer to the specification text where 'href' is used to see what limitations apply in each case.

Value:

Simple-ref

Name:

include

Purpose:

Any child element represents the name of a property to be included in the PROPFIND response. All elements inside an 'include' XML element MUST define properties related to the resource, although possible property names are in no way limited to those property names defined in this document or other standards. This element MUST NOT contain text or mixed content.

Name:

location

Purpose:

HTTP defines the "Location" header (see [RFC2616], section 14.30) for use with some status codes (such as 201 and the 300 series codes). When these codes are used inside a 'multistatus' element, the 'location' element can be used to provide the accompanying Location header value.

Description:

Contains a single href element with the same value that would be used in a Location header.

   <!ELEMENT location (href)>
      

Name:

lockentry

Purpose:

Defines the types of locks that can be used with the resource.

Name:

lockinfo

Purpose:

The 'lockinfo' XML element is used with a LOCK method to specify the type of lock the client wishes to have created.

Name:

lockroot

Purpose:

Contains the root URL of the lock, which is the URL through which the resource was addressed in the LOCK request.

Description:

The href contains a HTTP URL with the address of the root of the lock. The server SHOULD include this in all DAV:lockdiscovery property values and the response to LOCK requests.

Name:

lockscope

Purpose:

Specifies whether a lock is an exclusive lock, or a shared lock.

Name:

locktoken

Purpose:

The lock token associated with a lock.

Description:

The href contains a single lock token URI which refers to the lock.

Name:

locktype

Purpose:

Specifies the access type of a lock. At present, this specification only defines one lock type, the write lock.

Name:

multistatus

Purpose:

Contains multiple response messages.

Description:

The 'responsedescription' element at the top level is used to provide a general message describing the overarching nature of the response. If this value is available an application may use it instead of presenting the individual response descriptions contained within the responses.

Name:

owner

Purpose:

Provides information about the creator of a lock.

Description:

Allows a client to provide information sufficient for either directly contacting a principal (such as a telephone number or Email URI), or for discovering the principal (such as the URL of a homepage) who created a lock. The value provided MUST be treated as a dead property in terms of XML Information Item preservation. The server MUST NOT alter the value unless the owner value provided by the client is empty. For a certain amount of interoperability between different client implementations, if clients have URI-formatted contact information for the lock creator suitable for user display, then clients SHOULD put those URIs in 'href' child elements of the 'owner' element.

Extensibility:

MAY be extended with child elements, mixed content, text content or attributes.

Name:

prop

Purpose:

Contains properties related to a resource.

Description:

A generic container for properties defined on resources. All elements inside a 'prop' XML element MUST define properties related to the resource, although possible property names are in no way limited to those property names defined in this document or other standards. This element MUST NOT contain text or mixed content.

Name:

propertyupdate

Purpose:

Contains a request to alter the properties on a resource.

Description:

This XML element is a container for the information required to modify the properties on the resource. This XML element is multi-valued.

Name:

propfind

Purpose:

Specifies the properties to be returned from a PROPFIND method. Four special elements are specified for use with 'propfind': 'prop', 'allprop', 'include' and 'propname'. If 'prop' is used inside 'propfind' it MUST NOT contain property values.

Name:

propname

Purpose:

Specifies that only a list of property names on the resource is to be returned.

Name:

propstat

Purpose:

Groups together a prop and status element that is associated with a particular 'href' element.

Description:

The propstat XML element MUST contain one prop XML element and one status XML element. The contents of the prop XML element MUST only list the names of properties to which the result in the status element applies. The optional precondition/postcondition error code and 'responsedescription' text also apply to the properties named in 'prop'.

Name:

remove

Purpose:

Lists the DAV properties to be removed from a resource.

Description:

Remove instructs that the properties specified in prop should be removed. Specifying the removal of a property that does not exist is not an error. All the XML elements in a 'prop' XML element inside of a 'remove' XML element MUST be empty, as only the names of properties to be removed are required.

Name:

response

Purpose:

Holds a single response describing the effect of a method on resource and/or its properties.

Description:

The 'href' element contains a HTTP URL pointing to a WebDAV resource when used in the 'response' container. A particular 'href' value MUST NOT appear more than once as the child of a 'response' XML element under a 'multistatus' XML element. This requirement is necessary in order to keep processing costs for a response to linear time. Essentially, this prevents having to search in order to group together all the responses by 'href'. There are, however, no requirements regarding ordering based on 'href' values. The optional precondition/postcondition error code and 'responsedescription' text can provide additional information about this resource relative to the request or result.

Name:

responsedescription

Purpose:

Contains information about a status response within a Multi-Status.

Description:

Provides information suitable to be presented to a user.

Name:

set

Purpose:

Lists the DAV property values to be set for a resource.

Description:

The 'set' XML element MUST contain only a prop XML element. The elements contained by the prop XML element inside the 'set' XML element MUST specify the name and value of properties that are set on the resource identified by Request-URI. If a property already exists then its value is replaced. Language tagging information appearing in the scope of the 'prop' element (in the "xml:lang" attribute, if present) MUST be persistently stored along with the property, and MUST be subsequently retrievable using PROPFIND.

Name:

shared

Purpose:

Specifies a shared lock

Name:

status

Purpose:

Holds a single HTTP status-line

Value:

status-line (status-line defined in Section 6.1 of [RFC2616])

Name:

timeout

Purpose:

The number of seconds remaining before a lock expires.

Value:

TimeType (defined in Section 10.7).

Name:

write

Purpose:

Specifies a write lock.

Name:

creationdate

Purpose:

Records the time and date the resource was created.

Value:

date-time (defined in [RFC3339], see the ABNF in section 5.6.)

Protected:

MAY be protected. Some servers allow DAV:creationdate to be changed to reflect the time the document was created if that is more meaningful to the user (rather than the time it was uploaded). Thus, clients SHOULD NOT use this property in synchronization logic (use DAV:getetag instead).

COPY/MOVE behaviour:

This property value SHOULD be kept during a MOVE operation, but is normally re-initialized when a resource is created with a COPY. It should not be set in a COPY.

Description:

The DAV:creationdate property SHOULD be defined on all DAV compliant resources. If present, it contains a timestamp of the moment when the resource was created. Servers that are incapable of persistently recording the creation date SHOULD instead leave it undefined (i.e. report "Not Found")

Name:

displayname

Purpose:

Provides a name for the resource that is suitable for presentation to a user.

Value:

Any text

Protected:

SHOULD NOT be protected. Note that servers implementing RFC2518 might have made this a protected property as this is a new requirement.

COPY/MOVE behaviour:

This property value SHOULD be preserved in COPY and MOVE operations.

Description:

The DAV:displayname property should be defined on all DAV compliant resources. If present, the property contains a description of the resource that is suitable for presentation to a user. This property is defined on the resource, and hence SHOULD have the same value independent of the Request-URI used to retrieve it (thus computing this property based on the Request-URI is deprecated).

Name:

getcontentlanguage

Purpose:

Contains the Content-Language header value (from section 14.12 of [RFC2616]) as it would be returned by a GET without accept headers.

Value:

language-tag (language-tag is defined in section 3.10 of [RFC2616]).

Protected:

SHOULD NOT be protected, so that clients can reset the language. Note that servers implementing RFC2518 might have made this a protected property as this is a new requirement.

COPY/MOVE behaviour:

This property value SHOULD be preserved in COPY and MOVE operations.

Description:

The DAV:getcontentlanguage property MUST be defined on any DAV compliant resource that returns the Content-Language header on a GET.

Name:

getcontentlength

Purpose:

Contains the Content-Length header returned by a GET without accept headers.

Value:

See section 14.13 of [RFC2616].

Protected:

This property is computed, therefore protected.

Description:

The DAV:getcontentlength property MUST be defined on any DAV compliant resource that returns the Content-Length header in response to a GET.

COPY/MOVE behaviour:

This property value is dependent on the size of the destination resource, not the value of the property on the source resource.

Name:

getcontenttype

Purpose:

Contains the Content-Type header value (from section 14.17 of [RFC2616]) as it would be returned by a GET without accept headers.

Value:

media-type (defined in section 3.7 of [RFC2616])

Protected:

Potentially protected if the server prefers to assign content types on its own (see also discussion in Section 9.7.1).

COPY/MOVE behaviour:

This property value SHOULD be preserved in COPY and MOVE operations.

Description:

This property MUST be defined on any DAV compliant resource that returns the Content-Type header in response to a GET.

Name:

getetag

Purpose:

Contains the ETag header value (from section 14.19 of [RFC2616]) as it would be returned by a GET without accept headers.

Value:

entity-tag (defined in section 3.11 of [RFC2616])

Protected:

MUST be protected because this value is created and controlled by the server.

COPY/MOVE behaviour:

This property value is dependent on the final state of the destination resource, not the value of the property on the source resource. Also note the considerations in Section 8.7.

Description:

The getetag property MUST be defined on any DAV compliant resource that returns the Etag header. Refer to RFC2616 for a complete definition of the semantics of an ETag, and to Section 8.5 for a discussion of ETags in WebDAV.

Name:

getlastmodified

Purpose:

Contains the Last-Modified header value (from section 14.29 of [RFC2616]) as it would be returned by a GET method without accept headers.

Value:

rfc1123-date (defined in section 3.3.1 of [RFC2616])

Protected:

SHOULD be protected because some clients may rely on the value for appropriate caching behavior, or on the value of the Last-Modified header to which this property is linked.

COPY/MOVE behaviour:

This property value is dependent on the last modified date of the destination resource, not the value of the property on the source resource. Note that some server implementations use the file system date modified value for the DAV:getlastmodified value, and this can be preserved in a MOVE even when the HTTP Last-Modified value SHOULD change. Note that since [RFC2616] requires clients to use ETags where provided, a server implementing ETags can count on clients using a much better mechanism that modification dates for offline synchronization or cache control. Also note the considerations in Section 8.7.

Description:

Note that the last-modified date on a resource SHOULD only reflect changes in the body (the GET responses) of the resource. A change in a property only SHOULD NOT cause the last-modified date to change, because clients MAY rely on the last-modified date to know when to overwrite the existing body. The DAV:getlastmodified property MUST be defined on any DAV compliant resource that returns the Last-Modified header in response to a GET.

Name:

lockdiscovery

Purpose:

Describes the active locks on a resource

Protected:

MUST be protected. Clients change the list of locks through LOCK and UNLOCK, not through PROPPATCH.

COPY/MOVE behaviour:

The value of this property depends on the lock state of the destination, not on the locks of the source resource. Recall that locks are not moved in a MOVE operation.

Description:

Returns a listing of who has a lock, what type of lock he has, the timeout type and the time remaining on the timeout, and the associated lock token. If there are no locks, but the server supports locks, the property will be present but contain zero 'activelock' elements. If there is one or more lock, an 'activelock' element appears for each lock on the resource. This property is NOT lockable with respect to write locks (Section 7).

Name:

resourcetype

Purpose:

Specifies the nature of the resource.

Protected:

SHOULD be protected. Resource type is generally decided through the operation creating the resource (MKCOL vs PUT), not by PROPPATCH.

COPY/MOVE behaviour:

Generally a COPY/MOVE of a resource results in the same type of resource at the destination.

Description:

MUST be defined on all DAV compliant resources. Each child element identifies a specific type the resource belongs to, such as 'collection', which is the only resource type defined by this specification (see Section 14.3). If the element contains the 'collection' child element plus additional unrecognized elements, it should generally be treated as a collection. If the element contains no recognized child elements, it should be treated as a non-collection resource. The default value is empty. This element MUST NOT contain text or mixed content. Any custom child element is considered to be an identifier for a resource type.

Example: (fictional example to show extensibility)

    <x:resourcetype xmlns:x="DAV:"> 
        <x:collection/> 
        <f:search-results xmlns:f="http://www.example.com/ns"/> 
    </x:resourcetype> 
     

Name:

supportedlock

Purpose:

To provide a listing of the lock capabilities supported by the resource.

Protected:

MUST be protected. Servers determine what lock mechanisms are supported, not clients.

COPY/MOVE behaviour:

This property value is dependent on the kind of locks supported at the destination, not on the value of the property at the source resource. Servers attempting to COPY to a destination should not attempt to set this property at the destination.

Description:

Returns a listing of the combinations of scope and access types which may be specified in a lock request on the resource. Note that the actual contents are themselves controlled by access controls so a server is not required to provide information the client is not authorized to see. This property is NOT lockable with respect to write locks (Section 7).

A class 1 compliant resource MUST meet all "MUST" requirements in all sections of this document.¶

Class 1 compliant resources MUST return, at minimum, the value "1" in the DAV header on all responses to the OPTIONS method.¶

A class 2 compliant resource MUST meet all class 1 requirements and support the LOCK method, the DAV:supportedlock property, the DAV:lockdiscovery property, the Time-Out response header and the Lock-Token request header. A class "2" compliant resource SHOULD also support the Time-Out request header and the 'owner' XML element.¶

Class 2 compliant resources MUST return, at minimum, the values "1" and "2" in the DAV header on all responses to the OPTIONS method.¶

A resource can explicitly advertise its support for the revisions to RFC2518 made in this document. Class 1 MUST be supported as well. Class 2 MAY be supported. Advertising class 3 support in addition to class 1 and 2 means that the server supports all the requirements in this specification. Advertising class 3 and class 1 support, but not class 2, means that the server supports all the requirements in this specification except possibly those that involve locking support.¶

Example:

         DAV: 1, 3 
      

Due to their emphasis on authoring, WebDAV servers need to use authentication technology to protect not just access to a network resource, but the integrity of the resource as well. Furthermore, the introduction of locking functionality requires support for authentication.¶

A password sent in the clear over an insecure channel is an inadequate means for protecting the accessibility and integrity of a resource as the password may be intercepted. Since Basic authentication for HTTP/1.1 performs essentially clear text transmission of a password, Basic authentication MUST NOT be used to authenticate a WebDAV client to a server unless the connection is secure. Furthermore, a WebDAV server MUST NOT send Basic authentication credentials in a WWW-Authenticate header unless the connection is secure. Examples of secure connections include a Transport Layer Security (TLS) connection employing a strong cipher suite with mutual authentication of client and server, or a connection over a network which is physically secure, for example, an isolated network in a building with restricted access.¶

WebDAV applications MUST support the Digest authentication scheme [RFC2617]. Since Digest authentication verifies that both parties to a communication know a shared secret, a password, without having to send that secret in the clear, Digest authentication avoids the security problems inherent in Basic authentication while providing a level of authentication which is useful in a wide range of scenarios.¶

Denial of service attacks are of special concern to WebDAV servers. WebDAV plus HTTP enables denial of service attacks on every part of a system's resources.¶

• The underlying storage can be attacked by PUTting extremely large files.
• Asking for recursive operations on large collections can attack processing time.
• Making multiple pipelined requests on multiple connections can attack network connections.

WebDAV servers need to be aware of the possibility of a denial of service attack at all levels. The proper response to such an attack MAY be to simply drop the connection, or if the server is able to make a response, the server MAY use a 400-level status request such as 400 (Bad Request) and indicate why the request was refused (a 500-level status response would indicate that the problem is with the server, whereas unintentional DOS attacks are something the client is capable of remedying).¶

WebDAV provides, through the PROPFIND method, a mechanism for listing the member resources of a collection. This greatly diminishes the effectiveness of security or privacy techniques that rely only on the difficulty of discovering the names of network resources. Users of WebDAV servers are encouraged to use access control techniques to prevent unwanted access to resources, rather than depending on the relative obscurity of their resource names.¶

When submitting a lock request a user agent may also submit an 'owner' XML field giving contact information for the person taking out the lock (for those cases where a person, rather than a robot, is taking out the lock). This contact information is stored in a DAV:lockdiscovery property on the resource, and can be used by other collaborators to begin negotiation over access to the resource. However, in many cases this contact information can be very private, and should not be widely disseminated. Servers SHOULD limit read access to the DAV:lockdiscovery property as appropriate. Furthermore, user agents SHOULD provide control over whether contact information is sent at all, and if contact information is sent, control over exactly what information is sent.¶

Since property values are typically used to hold information such as the author of a document, there is the possibility that privacy concerns could arise stemming from widespread access to a resource's property data. To reduce the risk of inadvertent release of private information via properties, servers are encouraged to develop access control mechanisms that separate read access to the resource body and read access to the resource's properties. This allows a user to control the dissemination of their property data without overly restricting access to the resource's contents.¶

XML supports a facility known as "external entities", defined in section 4.2.2 of [XML], which instruct an XML processor to retrieve and include additional XML. An external XML entity can be used to append or modify the document type declaration (DTD) associated with an XML document. An external XML entity can also be used to include XML within the content of an XML document. For non-validating XML, such as the XML used in this specification, including an external XML entity is not required by XML. However, XML does state that an XML processor may, at its discretion, include the external XML entity.¶

External XML entities have no inherent trustworthiness and are subject to all the attacks that are endemic to any HTTP GET request. Furthermore, it is possible for an external XML entity to modify the DTD, and hence affect the final form of an XML document, in the worst case significantly modifying its semantics, or exposing the XML processor to the security risks discussed in [RFC3023]. Therefore, implementers must be aware that external XML entities should be treated as untrustworthy. If a server implementor chooses not to handle external XML entities, it SHOULD respond to requests containing external entities with the precondition defined above (no-external-entities).¶

There is also the scalability risk that would accompany a widely deployed application which made use of external XML entities. In this situation, it is possible that there would be significant numbers of requests for one external XML entity, potentially overloading any server which fields requests for the resource containing the external XML entity.¶

Furthermore, there's also a risk based on the evaluation of "internal entities" as defined in section 4.2.2 of [XML]. A small, carefully crafted request using nested internal entities may require enormous amounts of memory and/or processing time to process. Server implementors should be aware of this risk and configure their XML parsers so that requests like these can be detected and rejected as early as possible.¶

This specification encourages the use of "A Universally Unique Identifier (UUID) URN Namespace" ([RFC4122]) for lock tokens Section 6.5, in order to guarantee their uniqueness across space and time. Version 1 UUIDs (defined in section 4) MAY contain a "node" field that "consists of an IEEE 802 MAC address, usually the host address. For systems with multiple IEEE addresses, any available one can be used". Since a WebDAV server will issue many locks over its lifetime, the implication is that it may also be publicly exposing its IEEE 802 address.¶

• It is possible to track the movement of hardware from subnet to subnet.
• It may be possible to identify the manufacturer of the hardware running a WebDAV server.
• It may be possible to determine the number of each type of computer running WebDAV.

This risk only applies to host address based UUID versions. Section 4 of [RFC4122] describes several other mechanisms for generating UUIDs that do involve the host address and therefore do not suffer from this risk.¶

HTTP has the ability to host programs which are executed on client machines. These programs can take many forms including web scripts, executables, plug in modules, and macros in documents. WebDAV does not change any of the security concerns around these programs yet often WebDAV is used in contexts where a wide range of users can publish documents on a server. The server might not have a close trust relationship with the author that is publishing the document. Servers that allow clients to publish arbitrary content can usefully implement precautions to check that content published to the server is not harmful to other clients. Servers could do this by techniques such as restricting the types of content that is allowed to be published and running virus and malware detection software on published content. Servers can also mitigate the risk by having appropriate access restriction and authentication of users that are allowed to publish content to the server.¶

This specification defines two URI schemes: ¶

1. the "opaquelocktoken" scheme defined in Appendix C, and
2. the "DAV" URI scheme, which historically was used in RFC2518 to disambiguate WebDAV property and XML element names and which continues to be used for that purpose in this specification and others extending WebDAV. Creation of identifiers in the "DAV:" namespace is controlled by the IETF.

Note that defining new URI schemes for XML namespaces is now discouraged. "DAV:" was defined before standard best practices emerged.¶

XML namespaces disambiguate WebDAV property names and XML elements. Any WebDAV user or application can define a new namespace in order to create custom properties or extend WebDAV XML syntax. IANA does not need to manage such namespaces, property names or element names.¶

The message header fields below should be added to the permanent registry (see [RFC3864]).¶

Y. Y. Goland, Microsoft Corporation, One Microsoft Way, Redmond, WA 98052-6399. Email: yarong@microsoft.com.¶

E. J. Whitehead, Jr., Dept. Of Information and Computer Science, University of California, Irvine, Irvine, CA 92697-3425. Email: ejw@ics.uci.edu.¶

A. Faizi, Netscape, 685 East Middlefield Road, Mountain View, CA 94043. Email: asad@netscape.com.¶

S. R. Carter, Novell, 1555 N. Technology Way, M/S ORM F111, Orem, UT 84097-2399. Email: srcarter@novell.com.¶

D. Jensen, Novell, 1555 N. Technology Way, M/S ORM F111, Orem, UT 84097-2399. Email: dcjensen@novell.com.¶

XML supports two mechanisms for indicating that an XML element does not have any content. The first is to declare an XML element of the form <A></A>. The second is to declare an XML element of the form <A/>. The two XML elements are semantically identical.¶

XML is a flexible data format that makes it easy to submit data that appears legal but in fact is not. The philosophy of "Be flexible in what you accept and strict in what you send" still applies, but it must not be applied inappropriately. XML is extremely flexible in dealing with issues of white space, element ordering, inserting new elements, etc. This flexibility does not require extension, especially not in the area of the meaning of elements.¶

There is no kindness in accepting illegal combinations of XML elements. At best it will cause an unwanted result and at worst it can cause real damage.¶

The following request body for a PROPFIND method is illegal.¶

The definition of the propfind element only allows for the allprop or the propname element, not both. Thus the above is an error and must be responded to with a 400 (Bad Request).¶

Imagine, however, that a server wanted to be "kind" and decided to pick the allprop element as the true element and respond to it. A client running over a bandwidth limited line who intended to execute a propname would be in for a big surprise if the server treated the command as an allprop.¶

Additionally, if a server were lenient and decided to reply to this request, the results would vary randomly from server to server, with some servers executing the allprop directive, and others executing the propname directive. This reduces interoperability rather than increasing it.¶

The previous example was illegal because it contained two elements that were explicitly banned from appearing together in the propfind element. However, XML is an extensible language, so one can imagine new elements being defined for use with propfind. Below is the request body of a PROPFIND and, like the previous example, must be rejected with a 400 (Bad Request) by a server that does not understand the expired-props element.¶

To understand why a 400 (Bad Request) is returned let us look at the request body as the server unfamiliar with expired-props sees it.¶

As the server does not understand the 'expired-props' element, according to the WebDAV-specific XML processing rules specified in Section 17, it must process the request as if the element were not there. Thus the server sees an empty propfind, which by the definition of the propfind element is illegal.¶

The previous example contains the fictitious element leave-out. Its purpose is to prevent the return of any property whose name matches the submitted pattern. If the previous example were submitted to a server unfamiliar with 'leave-out', the only result would be that the 'leave-out' element would be ignored and a propname would be executed.¶

New value for "DAV:" header (Section 10.1) to advertise support for this specification.¶

Replaced lock-null resources with simpler locked empty resources (Section 7.3).¶

Support for UTF-16 now required (ref (Section 19)).¶

Changed meaning of PROPFIND 'allprop' so that it doesn't have to return live properties not defined in this specification; added 'include' syntax so that clients can retrieve specific live properties along with 'allprop' results.¶

Changes in LOCK refresh (not implicit anymore, uses LOCK without body with Lock-Token request header)¶

New element 'location' defined for handling redirected resources in Multi-Status.¶

Defined response bodies for error responses, including several machine-readable precondition or postcondition codes (Section 16) for error detail.¶

Removed definition of "source" property and special handling for dynamic resources.¶

The definition of the 102 Processing response was removed and servers ought to stop sending that response when they implement this specification; clients may be able to remove code that handles this.¶

Tightened requirements for storing property values (Section 4.3) when "xml:lang" appears and also when values are XML fragments (specifically on preserving prefixes, namespaces and whitespace.)¶

Tightened requirements on which properties are protected and computed (Section 15).¶

Several tightened requirements for general response handling (Section 8), including ETag and Location header, and reminder to use Date header.¶

Requirements for URL construction in Multi-Status responses, Destination and If headers: more consistent and mostly tighter requirements.¶

Tightened requirements for checking identity of lock creators (Section 6.4) during operations affected by locks.¶

Tightened requirements for copying properties (Section 9.8.2) and moving properties (Section 9.9.1).¶

Tightened requirements on preserving 'owner' field in locks (Section 9.10). Added "lockroot" element to lockdiscovery information.¶

Some changes for "If:" header (Section 10.4) handling, including "DAV:no-lock" state token.¶

Encouraged servers to change ETags (Section 8.5) only when body of resource changes.¶

Previously, servers were encouraged to return 409 status code in response to a collection LOCK request if some resource could not be locked. Now servers should use 207 Multi-Status instead.¶

Only 'rfc1123-date' productions are legal as values for DAV:getlastmodified.¶

New explicit requirement to do authorization checks before conditional checks (Section 8.4).¶

Defined idempotence, safeness and cacheability for all new methods.¶

Depth: Infinity doesn't affect other headers; by default these headers only apply to the Request-URI (Section 10.4).¶

Tightened requirements for supporting WebDAV collections (Section 5.2) within resources that do not support WebDAV (e.g. servlet containers).¶

Servers are no longer required to support all depth "infinity" PROPFIND requests, so clients need to be able to handle that and do multiple depth "1" requests instead.¶

No more "propertybehavior" specification allowed in MOVE and COPY requests¶

The change in behavior of LOCK with an unmapped URL might affect client implementations that counted on lock-null resources disappearing when the lock expired. Clients can no longer rely on that cleanup happening.¶

Clients use Lock-Token header, not the If header, to provide lock token when renewing lock. Section 9.10.2 ¶

Clients must refresh locks explicitly as this is now the only way to renew timeout.¶

Specified that a successful LOCK request to an unmapped URL creates a new, empty locked resource.¶

Resolved UNLOCK_NEEDS_IF_HEADER by clarifying that only Lock-Token header is needed on UNLOCK.¶

Added Section 16 on preconditions and postconditions and defined a number of preconditions and postconditions. The 'lock-token-submitted' precondition resolves the REPORT_OTHER_RESOURCE_LOCKED issue.¶

Added example of matching lock token to URI in the case of a collection lock in the If header section.¶

Removed ability for Destination header to take "abs_path" in order to keep consistent with other places where client provides URLs (If header, href element in request body)¶

Clarified the href element - that it generally contains HTTP URIs but not always.¶

Attempted to fix the BNF describing the If header to allow commas¶

Clarified presence of Depth header on LOCK refresh requests.¶

Added text to "COPY and the Overwrite Header" section to resolve issue OVERWRITE_DELETE_ALL_TOO_STRONG.¶

Added text to "HTTP URL Namespace Model" section to provide more clarification and examples on what consistency means and what is not required, to resolve issue CONSISTENCY.¶

Resolve DEFINE_PRINCIPAL by importing definition of principal from RFC3744.¶

Resolve INTEROP_DELETE_AND_MULTISTATUS by adding appendix 3 discussing backward-compatibility concerns.¶

Resolve DATE_FORMAT_GETLASTMODIFIED by allowing only rfc1123-date, not HTTP-date for getlastmodified.¶

Resolve COPY_INTO_YOURSELF_CLARIFY by adding sentence to first para. of COPY section.¶

Confirm that WHEN_TO_MULTISTATUS_FOR_DELETE_1 and WHEN_TO_MULTISTATUS_FOR_DELETE_2 are resolved and tweak language in DELETE section slightly to be clearly consistent.¶

More text clarifications to deal with several of the issues in LOCK_ISSUES. This may not completely resolve that set but we need feedback from the originator of the issues at this point.¶

Resolved COPY_INTO_YOURSELF_CLARIFY with new sentence in Copy For Collections section.¶

Double checked that LEVEL_OR_CLASS is resolved by using class, not level.¶

Further work to resolve IF_AND_AUTH and LOCK_SEMANTICS, clarifying text on using locks and being authenticated.¶

Added notes on use of 503 status response to resolve issue PROPFIND_INFINITY¶

Removed section on other uses of Metadata (and associated references)¶

Added reference to RFC4122 for lock tokens and removed section on generating UUIDs¶

Explained that even with language variation, a property has only one value (section 4.5).¶

Added section on lock owner (7.1) and what to do if lock requested by unauthenticated user¶

Removed section 4.2 -- justification on why to have metadata, not needed now¶

Removed paragraph in section 5.2 about collections with resource type "DAV:collection" but which are non-WebDAV compliant -- not implemented.¶

Added security considerations section on scripts and cookie sessions, suggested by Barry Lind¶

Clarified which error codes are defined and undefined in MultiStatus¶

Moved opaquelocktoken definition to an appendix and refer to RFC4122 for use of 'urn:uuid:' URI scheme; fix all lock token examples to use this.¶

Multi-status responses contain URLs which MUST either be absolute (and begin with the Request-URI or MUST be relative with new limitations. (bug 12)¶

Moved status code sections before example sections within PROPFIND section for section ordering consistency.¶

Clarified use of Location header with Multi-Status¶

Bugzilla issue resolutions: bugs 9, 12, 14, 19, 20, 29, 30, 34, 36, 102 and 172.¶

Bugzilla editorial issues: bugs 30, 57, 63, 68, 88, 89, 168, 180, 182, 185, 187.¶

More clarity between URL namespaces and XML namespaces, particularly at the beginning of paragraphs using the word namespace¶

More consistency in referring to properties with the namespace, as in "DAV:lockdiscovery", and referring to XML element names in single quotes, e.g. 'allprop' element.¶

Figure (example) formatting fixes¶

Bugzilla issues: bugs 24, 37, 39, 43, 45, 27, 25¶

Replaced references to "non-null state" of resources with more clear language about URLs that are mapped to resources, bug 25. Also added definition of URL/URI mapping. Bug 40.¶

Bugzilla issues: bug 7, 8, 9, 41, 47, 51, 62, 93, 171, 172. Bugs 28 and 94 were iterated on.¶

Bugzilla issues: 56, 59, 79, 99, 103, 175, 178. Part of bug 23. Iteration on bug 10.¶

Iteration on bugs 10, 46 and 47. Bug 11.¶

Remove "102 Processing" response¶

Fix bug 46, 105, 107, 120, 140 and 201.¶

Another stab at bug 12 - relative v. absolute URLs in Multi-Status response hrefs¶

Fix bug 6, 11, 15, 16, 28, 32, 42, 51, 52, 53, 58, 60, 62, 186, 189, 191, 199, 200¶

Fix bug 96¶

Clarify lock intro text on when a client might use another client's lock token - suggestion by Geoff, Nov 15¶

Removed Force-Authenticate header and instead added an appendix explaining how existing mechanisms might resolve the need of clients to get an authentication challenge (bug 18).¶

Bug 62, 113, 125, 131, 143, 144, 171, 193¶

Bug 176, 177, 179, 181, 184, 206, 207, 208¶

Bug 10, 50, 92, 213, 214, 215¶

not recommend use of 414 for over-long Destination URI, bug 179¶

Changes for bug 10, 31, 42, 44, 46, 47, 80, 86, 99, 124, 132, 143, 147, 152, 166, 177, 188, 216, 218¶

Various changes discussed in conference call, including bug 10, 42, 44, 80, 97, 152.¶

Bugs 55, 85, 86¶

Incorporated GULP (Lock model) into document, making a fair number of changes to rationalize the new order of explaining things, keeping text that explains a lock model concept in more detail but removing text that is redundant or inconsistent.¶

Various bugs including 46, 48, 53, 97, 152, 179, 184, 188, 200, 210, 211, and 225. Moved URL Handling from Multi-Status section to general request and response handling section as it now applies to Destination and If as well as 'href' in Multi-Status. Moved GR&RH section up one level to be the new Section 8.¶

Bug 53, 184, 210, 213, 217, 221¶

Further rewriting of URL Handling section. Changes resulting from discussion of empty locked resources and how servers should handle Content-Type in that situation. Bug 48, 179.¶

Bug 227, 228,¶