| HTTP Working Group | A. Hutton |
| Internet-Draft | Unify |
| Intended status: Standards Track | J. Uberti |
| Expires: November 21, 2015 | |
| M. Thomson | |
| Mozilla | |
| May 20, 2015 |
This specification allows HTTP CONNECT requests to indicate what protocol will be used within the tunnel once established, using the ALPN header field.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.¶
This Internet-Draft will expire on November 21, 2015.¶
Copyright (c) 2015 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
The HTTP CONNECT method (Section 4.3.6 of [RFC7231]) requests that the recipient establish a tunnel to the identified origin server and thereafter forward packets, in both directions, until the tunnel is closed. Such tunnels are commonly used to create end-to-end virtual connections, through one or more proxies.¶
The HTTP ALPN header field identifies the protocol that will be used within the tunnel, using the Application Layer Protocol Negotiation identifier (ALPN, [RFC7301]).¶
When the CONNECT method is used to establish a tunnel, the ALPN header field can be used to identify the protocol that the client intends to use with that tunnel. For a tunnel that is then secured using TLS [RFC5246], the header field carries the same application protocol label as will be carried within the TLS handshake. If there are multiple possible application protocols, all of those application protocols are indicated.¶
The ALPN header field carries an indication of client intent only. An ALPN identifier is used here only to identify the application protocol or suite of protocols that the client intends to use in the tunnel. No negotiation takes place using this header field. In TLS, the final choice of application protocol is made by the server from the set of choices presented by the client. Other substrates could negotiate the application protocol differently.¶
Proxies do not implement the tunneled protocol, though they might choose to make policy decisions based on the value of the header field. For example, a proxy could use the application protocol to select appropriate traffic prioritization.¶
Clients include the ALPN header field in an HTTP CONNECT request to indicate the application layer protocol that will be used within the tunnel, or the set of protocols that might be used within the tunnel.¶
Valid values for the protocol field are taken from the "Application-Layer Protocol Negotiation (ALPN) Protocol ID" registry (<http://www.iana.org/assignments/tls-extensiontype-values/#alpn-protocol-ids>) established by [RFC7301].¶
The ABNF (Augmented Backus-Naur Form) syntax for the ALPN header field is given below. It is based on the Generic Grammar defined in Section 2 of [RFC7230].¶
ALPN = "ALPN":" 1#protocol-id protocol-id = token ; percent-encoded ALPN protocol identifier
ALPN protocol names are octet sequences with no additional constraints on format. Octets not allowed in tokens ([RFC7230], Section 3.2.6) MUST be percent-encoded as per Section 2.1 of [RFC3986]. Consequently, the octet representing the percent character "%" (hex 25) MUST be percent-encoded as well.¶
In order to have precisely one way to represent any ALPN protocol name, the following additional constraints apply: ¶
With these constraints, recipients can apply simple string comparison to match protocol identifiers.¶
For example:
CONNECT www.example.com HTTP/1.1 Host: www.example.com ALPN: h2, http%2F1.1
For a CONNECT tunnel that conveys a TLS session that in turn encapsulates another protocol, the value of the ALPN header field contains the same list of ALPN identifiers that will be sent in the TLS ClientHello message [RFC7301].¶
Where no protocol negotiation is expected to occur, such as in protocols that do not use TLS, the ALPN header field contains a single ALPN Protocol Identifier corresponding to the application protocol that is intended to be used. If an alternative form of protocol negotiation is possible, the ALPN header field contains the set of protocols that might be negotiated.¶
When used in the ALPN header field, the ALPN identifier and registry are used to identify an entire application protocol stack, not a single protocol layer or component.¶
HTTP header fields are registered within the "Permanent Message Header Field Names" registry maintained at <https://www.iana.org/assignments/message-headers>. This document defines and registers the ALPN header field, according to [RFC3864] as follows: ¶
In case of using HTTP CONNECT to a TURN server ("Traversal Using Relays around NAT", [RFC5766]) the security considerations of Section 4.3.6 of [RFC7231] apply. It states that there "are significant risks in establishing a tunnel to arbitrary servers, particularly when the destination is a well-known or reserved TCP port that is not intended for Web traffic. Proxies that support CONNECT SHOULD restrict its use to a limited set of known ports or a configurable whitelist of safe request targets."¶
The ALPN header field described in this document is an OPTIONAL header field. Clients and HTTP proxies could choose to not support the header and therefore fail to provide it, or ignore it when present. If the header is not available or ignored, a proxy cannot identify the purpose of the tunnel and use this as input to any authorization decision regarding the tunnel. This is indistinguishable from the case where either client or proxy does not support the ALPN header field.¶
The value of the ALPN header field could be falsified by a client. If the data being sent through the tunnel is encrypted (for example, with TLS [RFC5246]), then the proxy might not be able to directly inspect the data to verify that the claimed protocol is the one which is actually being used, though a proxy might be able to perform traffic analysis [TRAFFIC]. A proxy therefore cannot rely on the value of the ALPN header field as a policy input in all cases.¶