HTTP Working Group J. Reschke
Internet-Draft greenbytes
Intended status: Standards Track A. Malhotra
Expires: May 13, 2022
J.M. Snell
November 9, 2021
The HTTP QUERY Method
draft-ietf-httpbis-safe-method-w-body-02
Abstract
This specification defines a new HTTP method, QUERY, as a safe,
idempotent request method that can carry request content.
Editorial Note
This note is to be removed before publishing as an RFC.
Discussion of this draft takes place on the HTTP working group
mailing list (ietf-http-wg@w3.org), which is archived at
.
Working Group information can be found at ;
source code and issues list for this draft can be found at
.
The changes in this draft are summarized in Appendix A.2.
Status of This Memo
This Internet-Draft is submitted in full conformance with the
provisions of BCP 78 and BCP 79.
Internet-Drafts are working documents of the Internet Engineering
Task Force (IETF). Note that other groups may also distribute
working documents as Internet-Drafts. The list of current Internet-
Drafts is at https://datatracker.ietf.org/drafts/current/.
Internet-Drafts are draft documents valid for a maximum of six months
and may be updated, replaced, or obsoleted by other documents at any
time. It is inappropriate to use Internet-Drafts as reference
material or to cite them other than as "work in progress."
This Internet-Draft will expire on May 13, 2022.
Reschke, et al. Expires May 13, 2022 [Page 1]
Internet-Draft The HTTP QUERY Method November 2021
Copyright Notice
Copyright (c) 2021 IETF Trust and the persons identified as the
document authors. All rights reserved.
This document is subject to BCP 78 and the IETF Trust's Legal
Provisions Relating to IETF Documents (https://trustee.ietf.org/
license-info) in effect on the date of publication of this document.
Please review these documents carefully, as they describe your rights
and restrictions with respect to this document. Code Components
extracted from this document must include Revised BSD License text as
described in Section 4.e of the Trust Legal Provisions and are
provided without warranty as described in the Revised BSD License.
Table of Contents
1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2
2. QUERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1. Caching . . . . . . . . . . . . . . . . . . . . . . . . . 4
3. The "Accept-Query" Header Field . . . . . . . . . . . . . . . 5
4. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . 5
4.1. Simple QUERY with a Direct Response . . . . . . . . . . . 5
4.2. Simple QUERY with indirect response (303 See Other) . . . 6
5. Security Considerations . . . . . . . . . . . . . . . . . . . 7
6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 7
7. Normative References . . . . . . . . . . . . . . . . . . . . 7
Appendix A. Change Log . . . . . . . . . . . . . . . . . . . . . 7
A.1. Since draft-ietf-httpbis-safe-method-w-body-00 . . . . . 8
A.2. Since draft-ietf-httpbis-safe-method-w-body-01 . . . . . 8
Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 8
1. Introduction
This specification defines the HTTP QUERY request method as a means
of making a safe, idempotent request that contains content.
Most often, this is desirable when the data conveyed in a request is
too voluminous to be encoded into the request's URI. For example,
while this is an common and interoperable query:
GET /feed?q=foo&limit=10&sort=-published HTTP/1.1
Host: example.org
Reschke, et al. Expires May 13, 2022 [Page 2]
Internet-Draft The HTTP QUERY Method November 2021
if the query parameters extend to several kilobytes or more of data
it may not be, because many implementations place limits on their
size. Often these limits are not known or discoverable ahead of
time, because a request can pass through many uncoordinated systems.
Additionally, expressing some data in the target URI is inefficient,
because it needs to be encoded to be a valid URI.
Encoding query parameters directly into the request URI also
effectively casts every possible combination of query inputs as
distinct resources. Depending on the application, that may not be
desirable.
As an alternative to using GET, many implementations make use of the
HTTP POST method to perform queries, as illustrated in the example
below. In this case, the input parameters to the search operation
are passed along within the request payload as opposed to using the
request URI.
A typical use of HTTP POST for requesting a search
POST /feed HTTP/1.1
Host: example.org
Content-Type: application/x-www-form-urlencoded
q=foo&limit=10&sort=-published
This variation, however, suffers from the same basic limitation as
GET in that it is not readily apparent -- absent specific knowledge
of the resource and server to which the request is being sent -- that
a safe, idempotent query is being performed.
The QUERY method provides a solution that spans the gap between the
use of GET and POST. As with POST, the input to the query operation
is passed along within the payload of the request rather than as part
of the request URI. Unlike POST, however, the method is explicitly
safe and idempotent, allowing functions like caching and automatic
retries to operate.
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
"SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and
"OPTIONAL" in this document are to be interpreted as described in BCP
14 [RFC2119] [RFC8174] when, and only when, they appear in all
capitals, as shown here.
Reschke, et al. Expires May 13, 2022 [Page 3]
Internet-Draft The HTTP QUERY Method November 2021
2. QUERY
The QUERY method is used to initiate a server-side query. Unlike the
HTTP GET method, which requests that a server return a representation
of the resource identified by the target URI (as defined by
Section 7.1 of [RFCHTTP]), the QUERY method is used to ask the server
to perform a query operation (described by the request payload) over
some set of data scoped to the effective request URI. The payload
returned in response to a QUERY cannot be assumed to be a
representation of the resource identified by the effective request
URI.
The body payload of the request defines the query. Implementations
MAY use a request body of any content type with the QUERY method,
provided that it has appropriate query semantics.
QUERY requests are both safe and idempotent with regards to the
resource identified by the request URI. That is, QUERY requests do
not alter the state of the targeted resource. However, while
processing a QUERY request, a server can be expected to allocate
computing and memory resources or even create additional HTTP
resources through which the response can be retrieved.
A successful response to a QUERY request is expected to provide some
indication as to the final disposition of the operation. For
instance, a successful query that yields no results can be
represented by a 204 No Content response. If the response includes
content, it is expected to describe the results of the operation. In
some cases, the server may choose to respond indirectly to the QUERY
request by returning a 3xx Redirection with a Location header field
specifying an alternate Request URI from which the results can be
retrieved using an HTTP GET request. Various non-normative examples
of successful QUERY responses are illustrated in Section 4.
The semantics of the QUERY method change to a "conditional QUERY" if
the request message includes an If-Modified-Since, If-Unmodified-
Since, If-Match, If-None-Match, or If-Range header field ([RFCHTTP],
Section 13). A conditional QUERY requests that the query be
performed only under the circumstances described by the conditional
header field(s). It is important to note, however, that such
conditions are evaluated against the state of the target resource
itself as opposed to the collected results of the search operation.
2.1. Caching
The response to a QUERY method is cacheable; a cache MAY use it to
satisfy subsequent QUERY requests as per Section 4 of
[HTTP-CACHING]).
Reschke, et al. Expires May 13, 2022 [Page 4]
Internet-Draft The HTTP QUERY Method November 2021
The cache key for a query (see Section 2 of [HTTP-CACHING]) MUST
incorporate the request content. When doing so, caches SHOULD first
normalize request content to remove semantically insignificant
differences, thereby improving cache efficiency, by:
o Removing content encoding(s)
o Normalizing based upon knowledge of format conventions, as
indicated by the any media type suffix in the request's Content-
Type field (e.g., "+json")
o Normalizing based upon knowledge of the semantics of the content
itself, as indicated by the request's Content-Type field.
Note that any such normalization is performed solely for the purpose
of generating a cache key; it does not change the request itself.
3. The "Accept-Query" Header Field
The "Accept-Query" response header field MAY be used by a server to
directly signal support for the QUERY method while identifying the
specific query format media type(s) that may be used.
Accept-Query = 1#media-type
The Accept-Query header field specifies a comma-separated listing of
media types (with optional parameters) as defined by Section 8.3.1 of
[RFCHTTP].
The order of types listed by the Accept-Query header field is
insignificant.
4. Examples
The non-normative examples in this section make use of a simple,
hypothetical plain-text based query syntax based on SQL with results
returned as comma-separated values. This is done for illustration
purposes only. Implementations are free to use any format they wish
on both the request and response.
4.1. Simple QUERY with a Direct Response
A simple query with a direct response:
Reschke, et al. Expires May 13, 2022 [Page 5]
Internet-Draft The HTTP QUERY Method November 2021
QUERY /contacts HTTP/1.1
Host: example.org
Content-Type: example/query
Accept: text/csv
select surname, givenname, email limit 10
Response:
HTTP/1.1 200 OK
Content-Type: text/csv
surname, givenname, email
Smith, John, john.smith@example.org
Jones, Sally, sally.jones@example.com
Dubois, Camille, camille.dubois@example.net
4.2. Simple QUERY with indirect response (303 See Other)
A simple query with an Indirect Response (303 See Other):
QUERY /contacts HTTP/1.1
Host: example.org
Content-Type: example/query
Accept: text/csv
select surname, givenname, email limit 10
Response:
HTTP/1.1 303 See Other
Location: http://example.org/contacts/query123
Fetch Query Response:
GET /contacts/query123 HTTP/1.1
Host: example.org
Response:
HTTP/1.1 200 OK
Content-Type: text/csv
surname, givenname, email
Smith, John, john.smith@example.org
Jones, Sally, sally.jones@example.com
Dubois, Camille, camille.dubois@example.net
Reschke, et al. Expires May 13, 2022 [Page 6]
Internet-Draft The HTTP QUERY Method November 2021
5. Security Considerations
The QUERY method is subject to the same general security
considerations as all HTTP methods as described in [RFCHTTP].
6. IANA Considerations
IANA is requested to add QUERY method in the permanent registry at
(see Section 16.1.1 of
[RFCHTTP]).
+-------------+------+------------+---------------+
| Method Name | Safe | Idempotent | Specification |
+-------------+------+------------+---------------+
| QUERY | Yes | Yes | Section 2 |
+-------------+------+------------+---------------+
Table 1
7. Normative References
[HTTP-CACHING]
Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
Ed., "HTTP Semantics", Work in Progress, Internet-Draft,
draft-ietf-httpbis-cache-19, September 10, 2021,
.
[RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
Requirement Levels", BCP 14, RFC 2119,
DOI 10.17487/RFC2119, March 1997,
.
[RFC8174] Leiba, B., "Ambiguity of Uppercase vs Lowercase in RFC
2119 Key Words", BCP 14, RFC 8174, DOI 10.17487/RFC8174,
May 2017, .
[RFCHTTP] Fielding, R., Ed., Nottingham, M., Ed., and J. Reschke,
Ed., "HTTP Semantics", Work in Progress, Internet-Draft,
draft-ietf-httpbis-semantics-19, September 10, 2021,
.
Appendix A. Change Log
This section is to be removed before publishing as an RFC.
Reschke, et al. Expires May 13, 2022 [Page 7]
Internet-Draft The HTTP QUERY Method November 2021
A.1. Since draft-ietf-httpbis-safe-method-w-body-00
o Use "example/query" media type instead of undefined "text/query"
()
o In Section 3, adjust the grammar to just define the field value
()
o Update to latest HTTP core spec, and adjust terminology
accordingly ()
o Reference RFC 8174 and markup bcp14 terms
()
o Update HTTP reference ()
o Relax restriction of generic XML media type in request body
()
A.2. Since draft-ietf-httpbis-safe-method-w-body-01
o Add minimal description of cacheability
()
o Use "QUERY" as method name ()
o Update HTTP reference ()
Authors' Addresses
Julian Reschke
greenbytes GmbH
Hafenweg 16
48155 Münster
Germany
Email: julian.reschke@greenbytes.de
URI: https://greenbytes.de/tech/webdav/
Ashok Malhotra
Email: malhotrasahib@gmail.com
James M Snell
Reschke, et al. Expires May 13, 2022 [Page 8]
Internet-Draft The HTTP QUERY Method November 2021
Email: jasnell@gmail.com
Reschke, et al. Expires May 13, 2022 [Page 9]