Using Early Data in HTTP

This document explains the risks of using early data for HTTP and describes techniques for reducing them. In particular, it defines a mechanism that enables clients to communicate with servers about early data, to assure correct operation.¶

This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.¶

This Internet-Draft will expire on April 23, 2018.¶

Copyright (c) 2017 IETF Trust and the persons identified as the document authors. All rights reserved.¶

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶

TLS 1.3 [TLS13] introduces the concept of early data (also known as zero round trip data or 0-RTT data). Early data allows a client to send data to a server in the first round trip of a connection, without waiting for the TLS handshake to complete if the client has spoken to the same server recently.¶

When used with HTTP [HTTP], early data allows clients to send requests immediately, avoiding the one or two round trip delay needed for the TLS handshake. This is a significant performance enhancement; however, it has significant limitations.¶

The primary risk of using early data is that an attacker might capture and replay the request(s) it contains. TLS [TLS13] describes techniques that can be used to reduce the likelihood that an attacker can successfully replay a request, but these techniques can be difficult to deploy, and still leave some possibility of a successful attack.¶

Note that this is different from automated or user-initiated retries; replays are initiated by an attacker without the awareness of the client.¶

To help mitigate the risk of replays in HTTP, this document gives an overview of techniques for controlling these risks in servers, and defines requirements for clients when sending requests in early data.¶

The advice in this document also applies to use of 0-RTT in HTTP over QUIC [HQ].¶

Conceptually, early data is concatenated with other application to form a single stream. This can mean that requests are entirely contained within early data, or only part of a request is early. In a multiplexed protocol, like HTTP/2 [RFC7540] or HTTP/QUIC [HQ], multiple requests might be partially delivered in early data.¶

The model that this document assumes is that once the TLS handshake completes, the early data received on that TLS connection is known to not be a replayed copy of that data. However, it is important to note that this does not mean that early data will not be or has not been replayed on another connection.¶

A server decides whether or not to offer a client the ability to send early data on future connections when sending the TLS session ticket.¶

1. TLS [TLS13] mandates the use of replay detection strategies that reduce the ability of an attacker to successfully replay early data. These anti-replay techniques reduce but don’t completely eliminate the chance of data being replayed and ensure a fixed upper limit to the number of replays.
2. The server can choose whether it will process early data before the TLS handshake completes. By deferring processing, it can ensure that only a successfully completed connection is used for the request(s) therein. This provides the server with some assurance that the early data was not replayed.
3. If the server receives multiple requests in early data, it can determine whether to defer HTTP processing on a per-request basis. This may require buffering the responses to preserve ordering in HTTP/1.1.
4. The server can cause a client to retry a request and not use early data by responding with the 425 (Too Early) status code (Section 5.2), in cases where the risk of replay is judged too great.

For a given request, the level of tolerance to replay risk is specific to the resource it operates upon (and therefore only known to the origin server). In general, if processing a request does not have state-changing side effects, the consequences of replay are not significant.¶

The request method’s safety ([RFC7231], Section 4.2.1) is one way to determine this. However, some resources do elect to associate side effects with safe methods, so this cannot be universally relied upon.¶

It is RECOMMENDED that origin servers allow resources to explicitly configure whether early data is appropriate in requests. Absent such explicit information, they SHOULD mitigate against early data in requests that have unsafe methods, using the techniques outlined above.¶

A request might be sent partially in early data with the remainder of the request being sent after the handshake completes. This does not necessarily affect handling of that request; what matters is when the server starts acting upon the contents of a request. Any time a server might initiate processing prior to completion of the handshake it needs to consider how a possible replay of early data could affect that processing (see also Section 6.2).¶

A server can partially process requests that are incomplete. Parsing header fields - without acting on the values - and determining request routing is likely to be safe from side-effects, but other actions might not be.¶

Intermediary servers do not have sufficient information to make this determination, so Section 5.2 describes a way for the origin to signal to them that a particular request isn’t appropriate for early data. Intermediaries that accept early data MUST implement that mechanism.¶

Note that a server cannot choose to selectively reject early data at the TLS layer. TLS only permits a server to accept all early data, or none of it. Once a server has decided to accept early data, it MUST process all requests in early data, even if the server rejects the request by sending a 425 (Too Early) response.¶

A server can limit the amount of early data with the max_early_data_size field of the early_data TLS extension. This can be used to avoid committing an arbitrary amount of memory for deferred requests. A server SHOULD ensure that when it accepts early data, it can defer processing of requests until after the TLS handshake completes.¶

A client that wishes to use early data commences sending HTTP requests immediately after sending the TLS ClientHello.¶

By their nature, clients have control over whether a given request is sent in early data – thereby giving the client control over risk of replay. Absent other information, clients MAY send requests with safe HTTP methods (see [RFC7231], Section 4.2.1) in early data when it is available, and SHOULD NOT send unsafe methods (or methods whose safety is not known) in early data.¶

If the server rejects early data at the TLS layer, a client MUST start sending again as though the connection was new. For HTTP/2, this means re-sending the connection preface. Any requests sent in early data MUST be sent again, unless the client decides to abandon those requests.¶

This automatic retry exposes the request to a potential replay attack. An attacker sends early data to one server instance that accepts and processes the early data, but allows that connection to proceed no further. The attacker then forwards the same messages from the client to another server instance that will reject early data. The client then retries the request, resulting in the request being processed twice. Replays are also possible if there are multiple server instances that will accept early data, or if the same server accepts early data multiple times (though this would be in violation of requirements in TLS).¶

Clients that use early data MUST retry requests upon receipt of a 425 (Too Early) status code; see Section 5.2.¶

An intermediary MUST NOT use early data when forwarding a request unless early data was used on a previous hop, or it knows that the request can be retried safely without consequences (typically, using out-of-band configuration). Absent better information, that means that an intermediary can only use early data if the request either arrived in early data or arrived with the Early-Data header field set to “1” (see Section 5.1).¶

Because HTTP requests can span multiple “hops”, it is necessary to explicitly communicate whether a request has been sent in early data on a previous connection. Likewise, some means of explicitly triggering a retry when early data is not desirable is necessary. Finally, it is necessary to know whether the client will actually perform such a retry.¶

• The Early-Data header field is included in requests that are received in early data.
• The 425 (Too Early) status code is defined for a server to indicate that a request could not be processed due to the consequences of a possible replay attack.

They are designed to enable better coordination of the use of early data between the user agent and origin server, and also when a gateway (also “reverse proxy”, “Content Delivery Network”, or “surrogate”) is present.¶

Gateways typically don’t have specific information about whether a given request can be processed safely when it is sent in early data. In many cases, only the origin server has the necessary information to decide whether the risk of replay is acceptable. These extensions allow coordination between a gateway and its origin server.¶

Using early data exposes a client to the risk that their request is replayed. A retried or replayed request can produce different side effects on the server. In addition to those side effects, replays and retries might be used for traffic analysis to recover information about requests or the resources those requests target.¶

This document registers the Early-Data header field in the “Message Headers” registry [HEADERS].¶

Header field name:

Early-Data

Applicable protocol:

http

Status:

standard

Author/Change controller:

IETF

Specification document(s):

This document

Related information:

(empty)

This document registers the 425 (Too Early) status code in the “Hypertext Transfer Protocol (HTTP) Status Code” registry established in [RFC7231].¶

Value:

425

Description:

Too Early

Reference:

This document

This document was not easy to produce. The following people made substantial contributions to the quality and completeness of the document: Subodh Iyengar, Benjamin Kaduk, Ilari Liusavaara, Kazuho Oku, Kyle Rose, and Victor Vasiliev.¶