| HTTPbis Working Group | R. Fielding, Editor |
| Internet-Draft | Adobe |
| Obsoletes: 2616 (if approved) | J. Reschke, Editor |
| Updates: 2617 (if approved) | greenbytes |
| Intended status: Standards Track | September 25, 2013 |
| Expires: March 29, 2014 |
The Hypertext Transfer Protocol (HTTP) is an application-level protocol for distributed, collaborative, hypermedia information systems. This document defines the HTTP Authentication framework.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at http://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.¶
This Internet-Draft will expire on March 29, 2014.¶
Copyright (c) 2013 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.¶
Discussion of this draft takes place on the HTTPBIS working group mailing list (ietf-http-wg@w3.org), which is archived at <http://lists.w3.org/Archives/Public/ietf-http-wg/>.¶
The current issues list is at <http://tools.ietf.org/wg/httpbis/trac/report/3> and related documents (including fancy diffs) can be found at <http://tools.ietf.org/wg/httpbis/>.¶
The changes in this draft are summarized in Appendix D.5.¶
This document defines HTTP/1.1 access control and authentication. It includes the relevant parts of RFC 2616 with only minor changes ([RFC2616]), plus the general framework for HTTP authentication, as previously defined in "HTTP Authentication: Basic and Digest Access Authentication" ([RFC2617]).¶
HTTP provides several OPTIONAL challenge-response authentication schemes that can be used by a server to challenge a client request and by a client to provide authentication information. The "basic" and "digest" authentication schemes continue to be specified in RFC 2617.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].¶
Conformance criteria and considerations regarding error handling are defined in Section 2.5 of [Part1].¶
This specification uses the Augmented Backus-Naur Form (ABNF) notation of [RFC5234] with the list rule extension defined in Section 7 of [Part1]. Appendix B describes rules imported from other documents. Appendix C shows the collected ABNF with the list rule expanded.¶
HTTP provides a simple challenge-response authentication framework that can be used by a server to challenge a client request and by a client to provide authentication information. It uses a case-insensitive token as a means to identify the authentication scheme, followed by additional information necessary for achieving authentication via that scheme. The latter can either be a comma-separated list of parameters or a single sequence of characters capable of holding base64-encoded information.¶
Parameters are name-value pairs where the name is matched case-insensitively, and each parameter name MUST only occur once per challenge.¶
The "token68" syntax allows the 66 unreserved URI characters ([RFC3986]), plus a few others, so that it can hold a base64, base64url (URL and filename safe alphabet), base32, or base16 (hex) encoding, with or without padding, but excluding whitespace ([RFC4648]).¶
The 401 (Unauthorized) response message is used by an origin server to challenge the authorization of a user agent. This response MUST include a WWW-Authenticate header field containing at least one challenge applicable to the requested resource.¶
The 407 (Proxy Authentication Required) response message is used by a proxy to challenge the authorization of a client and MUST include a Proxy-Authenticate header field containing at least one challenge applicable to the proxy for the requested resource.¶
challenge = auth-scheme [ 1*SP ( token68 / #auth-param ) ]
A user agent that wishes to authenticate itself with an origin server — usually, but not necessarily, after receiving a 401 (Unauthorized) — can do so by including an Authorization header field with the request.¶
A client that wishes to authenticate itself with a proxy — usually, but not necessarily, after receiving a 407 (Proxy Authentication Required) — can do so by including a Proxy-Authorization header field with the request.¶
Both the Authorization field value and the Proxy-Authorization field value contain the client's credentials for the realm of the resource being requested, based upon a challenge received in a response (possibly at some point in the past). When creating their values, the user agent ought to do so by selecting the challenge with what it considers to be the most secure auth-scheme that it understands, obtaining credentials from the user as appropriate.¶
credentials = auth-scheme [ 1*SP ( token68 / #auth-param ) ]
Upon a request for a protected resource that omits credentials, contains invalid credentials (e.g., a bad password) or partial credentials (e.g., when the authentication scheme requires more than one round trip), an origin server SHOULD send a 401 (Unauthorized) response that contains a WWW-Authenticate header field with at least one (possibly new) challenge applicable to the requested resource.¶
Likewise, upon a request that requires authentication by proxies that omit credentials or contain invalid or partial credentials, a proxy SHOULD send a 407 (Proxy Authentication Required) response that contains a Proxy-Authenticate header field with a (possibly new) challenge applicable to the proxy.¶
A server receiving credentials that are valid, but not adequate to gain access, ought to respond with the 403 (Forbidden) status code (Section 6.5.3 of [Part2]).¶
The HTTP protocol does not restrict applications to this simple challenge-response framework for access authentication. Additional mechanisms MAY be used, such as encryption at the transport level or via message encapsulation, and with additional header fields specifying authentication information. However, such additional mechanisms are not defined by this specification.¶
A proxy MUST forward the WWW-Authenticate and Authorization header fields unmodified and follow the rules found in Section 4.1.¶
The authentication parameter realm is reserved for use by authentication schemes that wish to indicate the scope of protection.¶
A protection space is defined by the canonical root URI (the scheme and authority components of the effective request URI; see Section 5.5 of [Part1]) of the server being accessed, in combination with the realm value if present. These realms allow the protected resources on a server to be partitioned into a set of protection spaces, each with its own authentication scheme and/or authorization database. The realm value is a string, generally assigned by the origin server, which can have additional semantics specific to the authentication scheme. Note that a response can have multiple challenges with the same auth-scheme but different realms.¶
The protection space determines the domain over which credentials can be automatically applied. If a prior request has been authorized, the user agent MAY reuse the same credentials for all other requests within that protection space for a period of time determined by the authentication scheme, parameters, and/or user preference. Unless specifically allowed by the authentication scheme, a single protection space cannot extend outside the scope of its server.¶
For historical reasons, a sender MUST only generate the quoted-string syntax. Recipients might have to support both token and quoted-string syntax for maximum interoperability with existing clients that have been accepting both notations for a long time.¶
The 401 (Unauthorized) status code indicates that the request has not been applied because it lacks valid authentication credentials for the target resource. The origin server MUST send a WWW-Authenticate header field (Section 4.4) containing at least one challenge applicable to the target resource. If the request included authentication credentials, then the 401 response indicates that authorization has been refused for those credentials. The user agent MAY repeat the request with a new or replaced Authorization header field (Section 4.1). If the 401 response contains the same challenge as the prior response, and the user agent has already attempted authentication at least once, then the user agent SHOULD present the enclosed representation to the user, since it usually contains relevant diagnostic information.¶
The 407 (Proxy Authentication Required) status code is similar to 401 (Unauthorized), but indicates that the client needs to authenticate itself in order to use a proxy. The proxy MUST send a Proxy-Authenticate header field (Section 4.2) containing a challenge applicable to that proxy for the target resource. The client MAY repeat the request with a new or replaced Proxy-Authorization header field (Section 4.3).¶
This section defines the syntax and semantics of HTTP/1.1 header fields related to authentication.¶
The "Proxy-Authenticate" header field consists of at least one challenge that indicates the authentication scheme(s) and parameters applicable to the proxy for this effective request URI (Section 5.5 of [Part1]). It MUST be included as part of a 407 (Proxy Authentication Required) response.¶
Unlike WWW-Authenticate, the Proxy-Authenticate header field applies only to the next outbound client on the response chain that chose to direct its request to the responding proxy. If that recipient is also a proxy, it will generally consume the Proxy-Authenticate header field (and generate an appropriate Proxy-Authorization in a subsequent request) rather than forward the header field to its own outbound clients. However, if a recipient proxy needs to obtain its own credentials by requesting them from a further outbound client, it will generate its own 407 response, which might have the appearance of forwarding the Proxy-Authenticate header field if both proxies use the same challenge set.¶
Note that the parsing considerations for WWW-Authenticate apply to this header field as well; see Section 4.4 for details.¶
The "WWW-Authenticate" header field consists of at least one challenge that indicates the authentication scheme(s) and parameters applicable to the effective request URI (Section 5.5 of [Part1]).¶
It MUST be included in 401 (Unauthorized) response messages and MAY be included in other response messages to indicate that supplying credentials (or different credentials) might affect the response.¶
User agents are advised to take special care in parsing the WWW-Authenticate field value as it might contain more than one challenge, or if more than one WWW-Authenticate header field is provided, the contents of a challenge itself can contain a comma-separated list of authentication parameters.¶
For instance:
WWW-Authenticate: Newauth realm="apps", type=1,
title="Login to \"apps\"", Basic realm="simple"
This header field contains two challenges; one for the "Newauth" scheme with a realm value of "apps", and two additional parameters "type" and "title", and another one for the "Basic" scheme with a realm value of "simple".
The HTTP Authentication Scheme Registry defines the name space for the authentication schemes in challenges and credentials. It will be created and maintained at <http://www.iana.org/assignments/http-authschemes>.¶
Registrations MUST include the following fields: ¶
Values to be added to this name space require IETF Review (see [RFC5226], Section 4.1).¶
There are certain aspects of the HTTP Authentication Framework that put constraints on how new authentication schemes can work:¶
HTTP authentication is presumed to be stateless: all of the information necessary to authenticate a request MUST be provided in the request, rather than be dependent on the server remembering prior requests. Authentication based on, or bound to, the underlying connection is outside the scope of this specification and inherently flawed unless steps are taken to ensure that the connection cannot be used by any party other than the authenticated user (see Section 2.3 of [Part1]).
The authentication parameter "realm" is reserved for defining Protection Spaces as defined in Section 2.2. New schemes MUST NOT use it in a way incompatible with that definition.
The "token68" notation was introduced for compatibility with existing authentication schemes and can only be used once per challenge or credential. New schemes thus ought to use the "auth-param" syntax instead, because otherwise future extensions will be impossible.
The parsing of challenges and credentials is defined by this specification, and cannot be modified by new authentication schemes. When the auth-param syntax is used, all parameters ought to support both token and quoted-string syntax, and syntactical constraints ought to be defined on the field value after parsing (i.e., quoted-string processing). This is necessary so that recipients can use a generic parser that applies to all authentication schemes.
Note: The fact that the value syntax for the "realm" parameter is restricted to quoted-string was a bad design choice not to be repeated for new parameters.
Definitions of new schemes ought to define the treatment of unknown extension parameters. In general, a "must-ignore" rule is preferable over "must-understand", because otherwise it will be hard to introduce new parameters in the presence of legacy recipients. Furthermore, it's good to describe the policy for defining new parameters (such as "update the specification", or "use this registry").
Authentication schemes need to document whether they are usable in origin-server authentication (i.e., using WWW-Authenticate), and/or proxy authentication (i.e., using Proxy-Authenticate).
The credentials carried in an Authorization header field are specific to the User Agent, and therefore have the same effect on HTTP caches as the "private" Cache-Control response directive (Section 5.2.2.6 of [Part6]), within the scope of the request they appear in.
Therefore, new authentication schemes that choose not to carry credentials in the Authorization header field (e.g., using a newly defined header field) will need to explicitly disallow caching, by mandating the use of either Cache-Control request directives (e.g., "no-store", Section 5.2.1.5 of [Part6]) or response directives (e.g., "private").
The HTTP Status Code Registry located at <http://www.iana.org/assignments/http-status-codes> shall be updated with the registrations below:¶
| Value | Description | Reference |
|---|---|---|
| 401 | Unauthorized | Section 3.1 |
| 407 | Proxy Authentication Required | Section 3.2 |
HTTP header fields are registered within the Message Header Field Registry maintained at <http://www.iana.org/assignments/message-headers/message-header-index.html>.¶
This document defines the following HTTP header fields, so their associated registry entries shall be updated according to the permanent registrations below (see [BCP90]):¶
| Header Field Name | Protocol | Status | Reference |
|---|---|---|---|
| Authorization | http | standard | Section 4.1 |
| Proxy-Authenticate | http | standard | Section 4.2 |
| Proxy-Authorization | http | standard | Section 4.3 |
| WWW-Authenticate | http | standard | Section 4.4 |
The change controller is: "IETF (iesg@ietf.org) - Internet Engineering Task Force".¶
This section is meant to inform developers, information providers, and users of known security concerns specific to HTTP/1.1 authentication. More general security considerations are addressed in HTTP messaging [Part1] and semantics [Part2].¶
Existing HTTP clients and user agents typically retain authentication information indefinitely. HTTP does not provide a mechanism for the origin server to direct clients to discard these cached credentials, since the protocol has no awareness of how credentials are obtained or managed by the user agent. The mechanisms for expiring or revoking credentials can be specified as part of an authentication scheme definition.¶
Circumstances under which credential caching can interfere with the application's security model include but are not limited to: ¶
User agents that cache credentials are encouraged to provide a readily accessible mechanism for discarding cached credentials under user control.¶
Authentication schemes that solely rely on the "realm" mechanism for establishing a protection space will expose credentials to all resources on an origin server. Clients that have successfully made authenticated requests with a resource can use the same authentication credentials for other resources on the same origin server. This makes it possible for a different resource to harvest authentication credentials for other resources.¶
This is of particular concern when an origin server hosts resources for multiple parties under the same canonical root URI (Section 2.2). Possible mitigation strategies include restricting direct access to authentication credentials (i.e., not making the content of the Authorization request header field available), and separating protection spaces by using a different host name (or port number) for each party.¶
This specification takes over the definition of the HTTP Authentication Framework, previously defined in RFC 2617. We thank John Franks, Phillip M. Hallam-Baker, Jeffery L. Hostetler, Scott D. Lawrence, Paul J. Leach, Ari Luotonen, and Lawrence C. Stewart for their work on that specification. See Section 6 of [RFC2617] for further acknowledgements.¶
See Section 10 of [Part1] for the Acknowledgments related to this document revision.¶
The framework for HTTP Authentication is now defined by this document, rather than RFC 2617.¶
The "realm" parameter is no longer always required on challenges; consequently, the ABNF allows challenges without any auth parameters. (Section 2)¶
The "token68" alternative to auth-param lists has been added for consistency with legacy authentication schemes such as "Basic". (Section 2)¶
This specification introduces the Authentication Scheme Registry, along with considerations for new authentication schemes. (Section 5.1)¶
The following core rules are included by reference, as defined in Appendix B.1 of [RFC5234]: ALPHA (letters), CR (carriage return), CRLF (CR LF), CTL (controls), DIGIT (decimal 0-9), DQUOTE (double quote), HEXDIG (hexadecimal 0-9/A-F/a-f), LF (line feed), OCTET (any 8-bit sequence of data), SP (space), and VCHAR (any visible US-ASCII character).¶
BWS = <BWS, defined in [Part1], Section 3.2.3> OWS = <OWS, defined in [Part1], Section 3.2.3> quoted-string = <quoted-string, defined in [Part1], Section 3.2.6> token = <token, defined in [Part1], Section 3.2.6>
In the collected ABNF below, list rules are expanded as per Section 1.2 of [Part1].¶
Authorization = credentials BWS = <BWS, defined in [Part1], Section 3.2.3> OWS = <OWS, defined in [Part1], Section 3.2.3> Proxy-Authenticate = *( "," OWS ) challenge *( OWS "," [ OWS challenge ] ) Proxy-Authorization = credentials WWW-Authenticate = *( "," OWS ) challenge *( OWS "," [ OWS challenge ] ) auth-param = token BWS "=" BWS ( token / quoted-string ) auth-scheme = token challenge = auth-scheme [ 1*SP ( token68 / [ ( "," / auth-param ) *( OWS "," [ OWS auth-param ] ) ] ) ] credentials = auth-scheme [ 1*SP ( token68 / [ ( "," / auth-param ) *( OWS "," [ OWS auth-param ] ) ] ) ] quoted-string = <quoted-string, defined in [Part1], Section 3.2.6> token = <token, defined in [Part1], Section 3.2.6> token68 = 1*( ALPHA / DIGIT / "-" / "." / "_" / "~" / "+" / "/" ) *"="
Changes up to the first Working Group Last Call draft are summarized in <http://trac.tools.ietf.org/html/draft-ietf-httpbis-p7-auth-19#appendix-C>.¶
Closed issues: ¶
Closed issues: ¶
Other changes: ¶
Closed issues: ¶
Closed issues: ¶
Closed issues: ¶