| HTTP Working Group | M. Nottingham |
| Internet-Draft | Fastly |
| Intended status: Standards Track | November 4, 2019 |
| Expires: May 7, 2020 |
To aid debugging, HTTP caches often append headers to a response detailing how they handled the request. This specification codifies that practice and updates it for HTTP’s current caching model.¶
RFC EDITOR: please remove this section before publication ¶
Discussion of this draft takes place on the HTTP working group mailing list (ietf-http-wg@w3.org), which is archived at https://lists.w3.org/Archives/Public/ietf-http-wg/.¶
Working Group information can be found at https://httpwg.org/; source code and issues list for this draft can be found at https://github.com/httpwg/http-extensions/labels/cache-header.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.¶
This Internet-Draft will expire on May 7, 2020.¶
Copyright (c) 2019 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License.¶
To aid debugging, HTTP caches often append headers to a response detailing how they handled the request.¶
Unfortunately, the semantics of these headers are often unclear, and both the semantics and syntax used vary greatly between implementations.¶
This specification defines a single, new HTTP response header field, “Cache-Status” for this purpose.¶
The Cache-Status HTTP response header indicates caches’ handling of the request corresponding to the response it occurs within.¶
Its value is a List [I-D.ietf-httpbis-header-structure]:¶
Cache-Status = sh-list
Each member of the parameterised list represents a cache that has handled the request. The first member of the list represents the cache closest to the origin server, and the last member of the list represents the cache closest to the user agent (possibly including the user agent’s cache itself, if it chooses to append a value).¶
Caches determine when it is appropriate to add the Cache-Status header field to a response. Some might decide to add it to all responses, whereas others might only do so when specifically configured to, or when the request contains a header that activates a debugging mode.¶
When adding a value to the Cache-Status header field, caches SHOULD preserve the existing contents of the header, to allow debugging of the entire chain of caches handling the request.¶
The list members identify the cache that inserted the value, and MUST have a type of either sh-string or sh-token. Depending on the deployment, this might be a product or service name (e.g., ExampleCache or “Example CDN”), a hostname (“cache-3.example.com”), and IP address, or a generated string.¶
Each member of the list can also have a number of parameters that describe that cache’s handling of the request. While all of these parameters are OPTIONAL, caches are encouraged to provide as much information as possible.¶
fwd = sh-token fwd-res = sh-token fwd-stored = sh-boolean res-fresh = sh-integer cache-fresh = sh-integer collapse-hit = sh-boolean collapse-wait = sh-integer key = sh-string
“fwd” indicates why the request went forward. If it is not present, the value defaults to “none”.¶
It can have one of the following values:¶
“fwd-res” indicates what the result of the forward request was. It is only valid when fwd is “res-stale” or “req-stale”, and defaults to “full” if not present when fwd is one of those values.¶
It can have one of the following values:¶
“fwd-stored” indicates whether the cache stored the response; a true value indicates that it did. Only valid when fwd is not “none”.¶
“res-fresh” indicates the response’s remaining freshness lifetime (as per [I-D.ietf-httpbis-cache], Section 4.2.1), as an integer number of seconds. This does not include freshness assigned by the cache (see “cache-fresh”). May be negative, to indicate staleness.¶
“cache-fresh” indicates the response’s remaining freshness lifetime as calculated by the cache, as an integer number of seconds. This includes freshness assigned by the cache; e.g., through heuristics, local configuration, or other factors. May be negative, to indicate staleness.¶
If both cache-fresh and res-fresh appear as parameters on the same value, it implies that the cache freshness overrode the response freshness.¶
“collapse-hit” indicates whether this request was collapsed together with one or more other forward requests; if true, the response was successfully reused; if not, a new request had to be made. If not present, the request was not collapsed with others.¶
“collapse-wait” indicates the amount of time that the cache held the request while waiting to see if it could be successfully collapsed, as an integer number of milliseconds.¶
“key” conveys a representation of the cache key used for the response. Note that this may be implementation-specific.¶
The most minimal cache hit:¶
Cache-Status: ExampleCache
… but a polite cache will give some more information, e.g.:¶
Cache-Status: ExampleCache; res-fresh=376
A “negative” hit (i.e., the cache imposed its own freshness lifetime):¶
Cache-Status: ExampleCache; cache-fresh=415
A stale hit just has negative freshness:¶
Cache-Status: ExampleCache; res-fresh=-412
Whereas a complete miss is:¶
Cache-Status: ExampleCache; fwd=uri-miss
A miss that validated on the back-end server:¶
Cache-Status: ExampleCache; fwd=res-stale; fwd-res=notmod
A miss that was collapsed with another request:¶
Cache-Status: ExampleCache; fwd=uri-miss; collapse-hit=?1
A miss that the cache attempted to collapse, but couldn’t:¶
Cache-Status: ExampleCache; fwd=uri-miss;
collapse-hit=?0; collapse-wait=240
Going through two layers of caching, both of which were hits, and the second collapsed with other requests:¶
Cache-Status: "CDN Company Here"; res-fresh=545,
OriginCache; cache-fresh=1100; collapse-hit=?1
Information about a cache’s content can be used to infer the activity of those using it. Generally, access to sensitive information in a cache is limited to those who are authorised to access that information (using a variety of techniques), so this does not represent an attack vector in the general sense.¶
However, if the Cache-Status header is exposed to parties who are not authorised to obtain the response it occurs within, it could expose information about that data.¶
For example, if an attacker were able to obtain the Cache-Status header from a response containing sensitive information and access were limited to one person (or limited set of people), they could determine whether that information had been accessed before. This is similar to the information exposed by various timing attacks, but is arguably more reliable, since the cache is directly reporting its state.¶