Collection Synchronization for WebDAV

Abstract

This specification defines an extension to WebDAV that allows efficient synchronization of the contents of a WebDAV collection.¶

Status of This Memo

This Internet-Draft is submitted to IETF in full conformance with the provisions of BCP 78 and BCP 79.¶

Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet-Drafts.¶

Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as “work in progress”.¶

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt.¶

The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html.¶

This Internet-Draft will expire on May 22, 2010.¶

Copyright Notice

This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Simplified BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the BSD License.¶

This document may contain material from IETF Documents or IETF Contributions published or made publicly available before November 10, 2008. The person(s) controlling the copyright in some of this material may not have granted the IETF Trust the right to allow modifications of such material outside the IETF Standards Process. Without obtaining an adequate license from the person(s) controlling the copyright in such materials, this document may not be modified outside the IETF Standards Process, and derivative works of it may not be created outside the IETF Standards Process, except to format it for publication as an RFC or to translate it into languages other than English.¶

1. Introduction

WebDAV [RFC4918] defines the concept of 'collections' which are hierarchical groupings of WebDAV resources on an HTTP [RFC2616] server. Collections can be of arbitrary size and depth (i.e., collections within collections). WebDAV clients that cache resource content need a way to synchronize that data with the server (i.e., detect what has changed and update their cache). This can currently be done using a WebDAV PROPFIND request on a collection to list all members of a collection along with their DAV:getetag property values, which allows the client to determine which resources were changed, added or deleted. However, this does not scale well to large collections as the XML response to the PROPFIND request will grow with the collection size.¶

This specification defines a new WebDAV report that results in the server returning to the client only information about those resources which have changed, are new or were deleted since a previous execution of the report on the collection.¶

Additionally, a new property is added to collection resources that is used to convey a "synchronization token" that is guaranteed to change when resources within the collection have changed.¶

2. Conventions Used in This Document

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119].¶

This document uses XML DTD fragments ([W3C.REC-xml-20081126], Section 3.2) as a purely notational convention. WebDAV request and response bodies cannot be validated by a DTD due to the specific extensibility rules defined in Section 17 of [RFC4918] and due to the fact that all XML elements defined by this specification use the XML namespace name "DAV:". In particular: ¶

element names use the "DAV:" namespace,
element ordering is irrelevant unless explicitly stated,
extension elements (elements not already defined as valid child elements) may be added anywhere, except when explicitly stated otherwise,
extension attributes (attributes not already defined as valid for this element) may be added anywhere, except when explicitly stated otherwise.

When an XML element type in the "DAV:" namespace is referenced in this document outside of the context of an XML fragment, the string "DAV:" will be prefixed to the element type.¶

This document inherits, and sometimes extends, DTD productions from Section 14 of [RFC4918].¶

3. Open Issues

We are extending the multistatus response element in a significant way. The DAV:sync-response differs from a regular DAV:response because, in the case of a created or modified resource, it contains both a DAV:status (201 for created, 200 for modified) and a DAV:propstat. The DAV:response on the other hand contains either a DAV:status or a DAV:propstat but not both. Shall we define a DAV:multisyncstatus response element instead of overloading DAV:multistatus ?
Do clients really need to be notified that a resource was created versus modified ? They should be able to figure that out by looking at the state of their current cache. If this information is not necessary, the response would not need to contain a DAV:status along with the DAV:propstat. This would allow the use of a regular multistatus (simply extended with a sync-token element).

4. WebDAV Synchronization

4.1. Overview

One way to synchronize data between two entities is to use some form of synchronization token. The token defines the state of the data being synchronized at a particular point in time. It can then be used to determine what has changed since one point in time and another.¶

This specification defines a new WebDAV report that is used to enable client-server collection synchronization based on such a token.¶

In order to synchronize the contents of a collection between a server and client, the server provides the client with a synchronization token each time the synchronization report is executed. That token represents the state of the data being synchronized at that point in time. The client can then present that same token back to the server at some later time and the server will return only those items that are new, have changed or were deleted since that token was generated. The server also returns a new token representing the new state at the time the report was run.¶

Typically the first time a client connects to the server it will need to be informed of the entire state of the collection (i.e., a full list of all resources that are currently contained in the collection). That is done by the client sending an empty token value to the server. This indicates to the server that a full listing is required. As an alternative, the client may choose to do its first synchronization using some other mechanism on the collection (e.g. some other form of batch resource information retrieval such as PROPFIND, SEARCH [RFC5323], or specialized REPORTs such as those defined in CalDAV [RFC4791] and CardDAV [I-D.ietf-vcarddav-carddav]) and ask for the DAV:sync-token property to be returned. This property (defined in Section 5) contains the same token that can be used later on to issue a DAV:sync-collection report.¶

In some cases a server may only wish to maintain a limited amount of history about changes to a collection. In that situation it will return an error to the client when the client presents a token that is "out of date". At that point the client has to fall back to synchronizing the entire collection by re-running the report request using an empty token value. ACL changes may also cause a token to become invalid.¶

4.2. DAV:sync-collection report

This specification defines the DAV:sync-collection report.¶

If this report is implemented by a WebDAV server, then the server MUST list the report in the "DAV:supported-report-set" property on any collection supporting synchronization.¶

To implement the behavior for this report a server needs to keep track of changes to any resources in a collection. This includes noting the addition of new resources, changes to existing resources and removal of resources (where "removal" could be the result of a DELETE or MOVE WebDAV request). Only internal members of the collection (as defined in Section 3 of [RFC4918]) are to be considered. The server will track each change and provide a synchronization "token" to the client that describes the state of the server at a specific point in time. This "token" is returned as part of the response to the "sync-collection" report. Clients include the last token they got from the server in the next "sync-collection" report that they execute and the server provides the changes from the previous state, represented by the token, to the current state, represented by the new token returned.¶

The synchronization token itself is an "opaque" string - i.e., the actual string data has no specific meaning or syntax. A simple implementation of such a token would be a numeric counter that counts each change as it occurs and relates that change to the specific object that changed.¶

Marshalling: ¶

The request URI MUST be a collection. The request body MUST be a DAV:sync-collection XML element (see Section 6.1), which MUST contain one DAV:sync-token XML element, and optionally a DAV:propstat XML element.
The request MUST include a Depth header with a value of "1".
The response body for a successful request MUST be a DAV:multistatus XML element, which MUST contain one DAV:sync-token element in addition to any DAV:sync-response elements.
The response body for a successful DAV:sync-collection report request MUST contain a DAV:sync-response element for each resource that was created, has changed or been deleted since the last synchronization operation as specified by the DAV:sync-token provided in the request. A given resource MUST appear only once in the response.
The DAV:status element in each DAV:sync-response element is used to indicate how the resource may have changed:
- A status code of '201 Created' is used to indicate resources that are new.
- A status code of '200 OK' is used to indicate resources that have changed.
- A status code of '404 Not Found' is used to indicate resources that have been removed.
The conditions under which each type of change may occur is further described in Section 4.3.

Preconditions: ¶

(DAV:valid-sync-token): The DAV:sync-token element value MUST map to a valid token previously returned by the server. A token may become invalid as the result of being "out of date" (out of the range of change history maintained by the server), or for other reasons (e.g. collection deleted, then recreated, ACL changes, etc...).

Postconditions: ¶

None.

4.3. Types of changes reported

Three types of resource state changes can be returned by the DAV:sync-collection report (new, modified, removed). This section further defines under which condition each of them shall be used. It also clarifies the case where a resource may have undergone multiple changes in between two synchronizations.¶

4.3.1. New resource

A resource MUST be reported as new if it has been mapped directly under the target collection since the request sync token was generated. This includes resources that have been mapped as the result of a COPY, MOVE or BIND ([I-D.ietf-webdav-bind]) operation. This also includes collection resources that have been created.¶

In the case where a mapping between a resource and the target collection was removed, then a new mapping with the same URI created, the new resource MUST be reported as new, while the old resource MUST NOT be reported as removed. For example, if a resource was deleted, then recreated using the same URI, it should be reported as a new resource only.¶

A resource MAY be reported as new if the user issuing the request was granted access to this resource, due to access control changes.¶

4.3.2. Modified resource

A resource MUST be reported as modified if it is not reported as new and if its entity tag value (defined in Section 3.11 of [RFC2616]) has changed since the request sync token was generated. In other words, the new resource change indicator takes precedence over the modified resource change indicator.¶

Collection resources MUST NOT be returned as modified. Instead clients are expected to synchronize changes in child collection resources on an individual basis.¶

4.3.3. Removed resource

A resource MUST be reported as removed if its mapping under the target collection has been removed since the request sync token was generated, and it has not been re-mapped since it was removed. This includes resources that have been unmapped as the result of a MOVE or UNBIND ([I-D.ietf-webdav-bind]) operation. This also includes collection resources that have been removed.¶

If a resource was created (and possibly modified), then removed in between two synchronizations, it MUST NOT be reported as new, modified or removed.¶

A resource MAY be reported as removed if the user issuing the request has no longer access to this resource, due to access control changes.¶

4.4. Example: Initial DAV:sync-collection REPORT

In this example, the client is making its first synchronization request to the server, so the DAV:sync-token element in the request is empty. It also asks for the DAV:getetag property. The server responds with the items currently in the targeted collection (indicating that they are 'new' via the '201 Created' status code). The current synchronization token is also returned.¶

>> Request <<


REPORT /home/cyrusdaboo/ HTTP/1.1
Host: webdav.example.com
Depth: 1
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx

<?xml version="1.0" encoding="utf-8" ?>
<D:sync-collection xmlns:D="DAV:">
  <D:sync-token/>
  <D:prop>
    <D:getetag/>
  </D:prop>
</D:sync-collection>

>> Response <<


HTTP/1.1 207 Multi-Status
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx

<?xml version="1.0" encoding="utf-8" ?>
<D:multistatus xmlns:D="DAV:">
  <D:sync-response>
  <D:href
>http://webdav.example.com/home/cyrusdaboo/test.doc</D:href>
  <D:status>HTTP/1.1 201 Created</D:status>
  <D:propstat>
    <D:prop>
      <D:getetag>"00001-abcd1"</D:getetag>
    </D:prop>
    <D:status>HTTP/1.1 200 OK</D:status>
  </D:propstat>
  </D:sync-response>
  <D:sync-response>
  <D:href
>http://webdav.example.com/home/cyrusdaboo/vcard.vcf</D:href>
  <D:status>HTTP/1.1 201 Created</D:status>
  <D:propstat>
    <D:prop>
      <D:getetag>"00002-abcd1"</D:getetag>
    </D:prop>
    <D:status>HTTP/1.1 200 OK</D:status>
  </D:propstat>
  </D:sync-response>
  <D:sync-response>
  <D:href
>http://webdav.example.com/home/cyrusdaboo/calendar.ics</D:href>
  <D:status>HTTP/1.1 201 Created</D:status>
  <D:propstat>
    <D:prop>
      <D:getetag>"00003-abcd1"</D:getetag>
    </D:prop>
    <D:status>HTTP/1.1 200 OK</D:status>
  </D:propstat>
  </D:sync-response>
  <D:sync-token>1234</D:sync-token>
</D:multistatus>

4.5. Example: DAV:sync-collection Report with token

In this example, the client is making a synchronization request to the server and is using the DAV:sync-token element returned from the last report it ran on this collection. The server responds listing the items that have been added, changed or removed. The (new) current synchronization token is also returned.¶

>> Request <<


REPORT /home/cyrusdaboo/ HTTP/1.1
Host: webdav.example.com
Depth: 1
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx

<?xml version="1.0" encoding="utf-8" ?>
<D:sync-collection xmlns:D="DAV:">
  <D:sync-token>1234</D:sync-token>
  <D:prop>
    <D:getetag/>
  </D:prop>
</D:sync-collection>

>> Response <<


HTTP/1.1 207 Multi-Status
Content-Type: text/xml; charset="utf-8"
Content-Length: xxxx

<?xml version="1.0" encoding="utf-8" ?>
<D:multistatus xmlns:D="DAV:">
  <D:sync-response>
  <D:href
>http://webdav.example.com/home/cyrusdaboo/file.xml</D:href>
  <D:status>HTTP/1.1 201 Created</D:status>
  <D:propstat>
    <D:prop>
      <D:getetag>"00004-abcd1"</D:getetag>
    </D:prop>
    <D:status>HTTP/1.1 200 OK</D:status>
  </D:propstat>
  </D:sync-response>
  <D:sync-response>
  <D:href
>http://webdav.example.com/home/cyrusdaboo/vcard.vcf</D:href>
  <D:status>HTTP/1.1 200 OK</D:status>
  <D:propstat>
    <D:prop>
      <D:getetag>"00002-abcd2"</D:getetag>
    </D:prop>
    <D:status>HTTP/1.1 200 OK</D:status>
  </D:propstat>
  </D:sync-response>
  <D:sync-response>
  <D:href
>http://webdav.example.com/home/cyrusdaboo/test.doc</D:href>
  <D:status>HTTP/1.1 404 Not Found</D:status>
  </D:sync-response>
  <D:sync-token>1238</D:sync-token>
</D:multistatus>

5. DAV:sync-token Property

Name:

sync-token

Namespace:

DAV:

Purpose:

Contains the value of the synchronization token as it would be returned by a DAV:sync-collection report.

Value:

Any text.

Protected:

MUST be protected because this value is created and controlled by the server.

COPY/MOVE behavior:

This property value is dependent on the final state of the destination resource, not the value of the property on the source resource.

Description:

The DAV:sync-token property MUST be defined on all resources that support the DAV:sync-collection report. It contains the value of the synchronization token as it would be returned by a DAV:sync-collection report on that resource at the same point in time. It SHOULD NOT be returned by a PROPFIND DAV:allprop request (as defined in Section 14.2 of [RFC4918]).

Definition:


<!ELEMENT sync-token #PCDATA>

6. XML Element Definitions

6.1. DAV:sync-collection XML Element

Name:: sync-collection
Namespace:: DAV:
Purpose:: WebDAV report used to synchronize data between client and server.
Description:: See Section 4.


<!ELEMENT sync-collection (sync-token, DAV:prop?)>

6.2. DAV:sync-token XML Element

Name:: sync-token
Namespace:: DAV:
Purpose:: The synchronization token provided by the server and returned by the client.
Description:: See Section 4.


<!ELEMENT sync-token CDATA>

6.3. DAV:multistatus XML Element

Name:: multistatus
Namespace:: DAV:
Purpose:: Extends the DAV:multistatus element to include synchronization details.
Description:: See Section 4.


<!ELEMENT multistatus ((DAV:response*, DAV:responsedescription?) |
             (DAV:sync-response*, DAV:sync-token,
              DAV:responsedescription?))>

6.4. DAV:sync-response XML Element

Name:: sync-response
Namespace:: DAV:
Purpose:: Contains the synchronization results returned by the server.
Description:: See Section 4.


<!ELEMENT sync-response (DAV:href, DAV:status, DAV:propstat?)>

10. References

10.1. Normative References

[RFC2119]: Bradner, S., “Key words for use in RFCs to Indicate Requirement Levels”, BCP 14, RFC 2119, March 1997.
[RFC2616]: Fielding, R., Gettys, J., Mogul, J., Frystyk, H., Masinter, L., Leach, P., and T. Berners-Lee, “Hypertext Transfer Protocol -- HTTP/1.1”, RFC 2616, June 1999.
[RFC4918]: Dusseault, L., “HTTP Extensions for Web Distributed Authoring and Versioning (WebDAV)”, RFC 4918, June 2007.
[W3C.REC-xml-20081126]: Yergeau, F., Sperberg-McQueen, C., Bray, T., Paoli, J., and E. Maler, “Extensible Markup Language (XML) 1.0 (Fifth Edition)”, World Wide Web Consortium Recommendation REC-xml-20081126, November 2008, <http://www.w3.org/TR/2008/REC-xml-20081126>.

10.2. Informative References

[I-D.ietf-vcarddav-carddav]: Daboo, C., “vCard Extensions to WebDAV (CardDAV)”, Internet-Draft draft-ietf-vcarddav-carddav-10 (work in progress), November 2009.
[I-D.ietf-webdav-bind]: Clemm, G., Crawford, J., Reschke, J., and J. Whitehead, “Binding Extensions to Web Distributed Authoring and Versioning (WebDAV)”, Internet-Draft draft-ietf-webdav-bind-26 (work in progress), September 2009.
[RFC4791]: Daboo, C., Desruisseaux, B., and L. Dusseault, “Calendaring Extensions to WebDAV (CalDAV)”, RFC 4791, March 2007.
[RFC5323]: Reschke, J., Reddy, S., Davis, J., and A. Babich, “Web Distributed Authoring and Versioning (WebDAV) SEARCH”, RFC 5323, November 2008.

Appendix A. Change History (to be removed prior to publication as an RFC)

Changes in -02: ¶

Added definition of sync-token WebDAV property.
Added references to SEARCH, CalDAV, CardDAV as alternative ways to first synchronize a collection.
Added section defining under which condition each state change (new, modified, removed) should be reported. Added reference to BIND.
Incorporated feedback from Julian Reschke and Ciny Joy.
More details on the use of the DAV:valid-sync-token precondition.

Changes in -01: ¶

Updated to 4918 reference.
Fixed examples to properly include DAV:status in DAV:propstat
Switch to using XML conventions text from RFC5323.